|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Xwindows or Freenx in a guest domain
Greetings! I tried to get FreeNX working and was getting sigterm 15 error. Which noone was able to help with. I decided to troubleshoot the problem by just connecting thru SSH -Y connection from dom0 to domU. The image for the guest was created in qemu and the system partition was migrated to a raw partition for use with Xen. I have spent two weeks troubleshooting it and no luck. I have reinstalled openssh and its dependents on both domU and dom0 and still no luck at all. I am at my wits end with this problem. I have spent about 12 hours with people from the #linuxhelp #fedora from freenode and irc.oftc.. and noone has been able to help.. They think its a Xen issue but I am not sure. Next I was going to try and get it working from dom0 to the qemu image to see if it made a difference. Here is the details trying to setup xnest session to remotely launch xterm (later on I would like to get gnome working remotely) on the server side I have IP address 192.168.15.101 on the client side I have IP address 192.168.15.100 I am not using DNS I launch the SSHD with the command /usr/sbin/sshd -d -p 1236 It says debug1: sshd version OpenSSH_4.2p1 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: rexec_argv[0]='/usr/sbin/sshd' debug1: rexec_argv[1]='-d' debug1: rexec_argv[2]='-p' debug1: rexec_argv[3]='1236' debug1: Bind to port 1236 on 192.168.15.101. Server listening on 192.168.15.101 port 1236 On the client I issue xhost + It says access control disabled, clients can connect from any host I type Xterm an Xterm session starts In the Xterm session I type Xnest :1 -ac & It informs me Could not init font path element /usr/X11R6/lib/X11/fonts/TTF/, removing from list! Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! I hit <enter> A prompt appears I type ssh -Xvvv -p 1236 hikenboot@xxxxxxxxxxxxxx It tells me It says a bunch of stuff then It says debug3:authmethod_is_enabled password debug1: Next authentication method: password hieknboot@xxxxxxxxxxxxxx's password: I type my password It says a bunch of stuff then it says debug1: Recieved SIGCHLD. and then a prompt appears I type export DISPLAY=192.168.15.100:1 then I type xterm the last lines on the server say debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_channel_req: channel 0 request x11-req reply 0 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req x11-req debug1: channel 1: new [X11 inet listener] debug1: channel 2: new [X11 inet listener] debug1: server_input_channel_req: channel 0 request pty-req reply 0 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req pty-req debug1: Allocating pty. debug1: session_new: init debug1: session_new: session 0 debug1: session_pty_req: session 0 alloc /dev/pts/1 debug1: server_input_channel_req: channel 0 request shell reply 0 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req shell debug1: Setting controlling tty using TIOCSCTTY. on the clients xterm /xnest session it just hangs! thats it.. thanks in advance for your help and happy hollidays! __________________________________________________ _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |