Re: [Xen-users] XEN and AVM-Fritzcard in Dom-U

[Rene <install@xxxxxxxxxxxx>]

hi,

i solved theproblem myself.
all to do is a "export ARCH=xen" before compiling the driver.
Now everthing is fine.

regards rene



Rene wrote:

> Hi list.
>
> I successfully comlied my own Dom0-Kernel with capi-support and use it in
> test-domU fot getting my isdn-card to work in it.
> I have compiled the driver from ftp.avm.de .
> In lspci i can see my card.
> I use xen-2.0.7 from source.
>
> If i try to start it i get the following error :
>
> fcpci: module license 'Proprietary' taints kernel.
> fcpci: AVM FRITZ!Card PCI driver, revision 0.6.2
> fcpci: (fcpci built on Dec 16 2005 at 07:09:12)
> PCI: Obtained IRQ 23 for device 0000:02:0b.0
> fcpci: AVM FRITZ!Card PCI found: port 0xdf80, irq 23
> fcpci: Loading...
> fcpci: Driver 'fcpci' attached to stack. (152)
> general protection fault: 0000 [#1]
> PREEMPT
> Modules linked in: fcpci
> CPU:    0
> EIP:    0061:[<c292c4ab>]    Tainted: P      VLI
> EFLAGS: 00010246   (2.6.11.12-xen0-rema)
> EIP is at enter_critical+0xb/0x20 [fcpci]
> eax: 00000246   ebx: c1972004   ecx: 00001200   edx: c1972004
> esi: c2951edc   edi: c0024c00   ebp: c079fe20   esp: c079fe14
> ds: 007b   es: 007b   ss: 0069
> Process modprobe (pid: 987, threadinfo=c079e000 task=c07aba80)
> Stack: c28de18e 00001200 00000000 00000000 c28e1c3f c197201c 000000bf
> c28e133e
>       c2951edc c1972004 c1fa8a04 c1fa8a58 c28e1ddc c1fec004 000032c8
> 00000001
>       c292c71c c2950e60 c292c562 c1fa8a04 c1fa8a58 c292cc7d c1fa8a04
> c2950da0
> Call Trace:
> [<c28de18e>] EnterCritical+0xe/0x10 [fcpci]
> [<c28e1c3f>] _LI_AddTop+0xf/0x40 [fcpci]
> [<c28e133e>] QUEUE_Init+0x7e/0x90 [fcpci]
> [<c28e1ddc>] CM_Start+0x3c/0x80 [fcpci]
> [<c292c71c>] start+0x3c/0xc0 [fcpci]
> [<c292c562>] params_ok+0x42/0x60 [fcpci]
> [<c292cc7d>] add_card+0x9d/0x1b0 [fcpci]
> [<c292f16f>] link_library+0xf/0x20 [fcpci]
> [<c292c1ac>] fritz_probe+0x7c/0x130 [fcpci]
> [<c0204ef0>] kobject_hotplug+0x270/0x300
> [<c02108b2>] pci_device_probe_static+0x52/0x70
> [<c021090c>] __pci_device_probe+0x3c/0x50
> [<c021094c>] pci_device_probe+0x2c/0x50
> [<c02316bf>] driver_probe_device+0x2f/0x80
> [<c023180c>] driver_attach+0x5c/0xa0
> [<c0231d5d>] bus_add_driver+0x9d/0xd0
> [<c023237f>] driver_register+0x2f/0x40
> [<c0210bc4>] pci_register_driver+0x64/0x90
> [<c295a0ba>] fritz_init+0xba/0x116 [fcpci]
> [<c01342a3>] sys_init_module+0x183/0x240
> [<c0109268>] syscall_call+0x7/0xb
> Code: 0b 01 ca 89 14 24 e8 65 25 fb ff 01 03 8b 5c 24 0c 83 c4 10 c3 8d 74
> 26 00 8d bc 27 00 00 00 00 a1 d0 7e 95 c2 85 c0 75 08 9c 58 <fa> a3 30 7f
> 95 c2 ff 05 d0 7e 95 c2 c3 90 8d b4 26 00 00 00 00
>
> can you give me any hints please.
>
> kind regards
> rene
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>
>  

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users