[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Re: ServeRAID 4Lx - Plain 2.6.12.6 works - Xen not
Ian Pratt <m+Ian.Pratt@xxxxxxxxxxxx> wrote: >> I try to install Xen 3.0.0 on a IBM x342 with a ServeRAID 4Lx >> controller. >> The box boots with "plain" 2.6.12.6 (aic7xx- and >> serveraid-support included). It does not with a similar >> configuration of 2.6.12.6-xen0. > > The 2.6.12.6-xen kernel has ServeRAID support. Correct. I guess, that I need AIC7XXX support as well (I've attached both .configs). > You just need to build an appropriate initrd The vanilla kernel boots without initrd and detects the ServeRAID controller "without" problems (ok - obviously 2.6.12s ServeRAID driver is too new): ips 0000:02:05.0: Warning ! ! ! ServeRAID Version Mismatch ips 0000:02:05.0: Bios = 7.00.14, Firmware = 7.00.14, Device Driver = 7.10.18 ips 0000:02:05.0: These levels should match to avoid possible compatibility problems. scsi2 : IBM PCI ServeRAID 7.10.18 Build 731 <ServeRAID 4Lx> > -- or follow the RPM install instructions. I checked the troubleshooting tip When running the multiple processor kernel, Linux has a problem accessing controllers that are assigned IRQ 9 by the system BIOS. To correct this problem, enter the system BIOS and change the IRQ assigned to each controller. but mehl:~# cat /proc/interrupts CPU0 0: 67416450 local-APIC-edge timer 1: 95 IO-APIC-edge i8042 2: 0 XT-PIC cascade 11: 0 IO-APIC-level ohci_hcd:usb1 14: 13 IO-APIC-edge ide0 24: 36036 IO-APIC-level ips 26: 15 IO-APIC-level aic7xxx 27: 15 IO-APIC-level aic7xxx 28: 59989 IO-APIC-level eth0 NMI: 0 LOC: 67417317 ERR: 0 MIS: 0 Generic SCSI support is enabled in both kernels, too. Further hints? by Töns -- There is no safe distance. Attachment:
config.2.6.12.6.xen0 Attachment:
config.2.6.12.6.plain _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |