[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-users] domU network doesn't get IP
- To: Jayesh Salvi <jayeshsalvi@xxxxxxxxx>
- From: Anand <xen.mails@xxxxxxxxx>
- Date: Tue, 3 Jan 2006 00:16:48 +0530
- Cc: Xen-users@xxxxxxxxxxxxxxxxxxx
- Delivery-date: Mon, 02 Jan 2006 18:51:51 +0000
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=dYD7fMJFiYD2jZn5kf7BEhth+zOfnB4IRutd++IzC30WZdToQmRjvaqbseX4JRpA5+lPhoasz369auX/HV7vuBUYpJWO2kzUPzorLtmWJBtk3qYgXwmm7Ft1Qmu4tGNuFUajKA1Hl/KbSXpz8xTsVSs0c2oOdwl9AScY3VIKu6s=
- List-id: Xen user discussion <xen-users.lists.xensource.com>
Make sure your firewall is disabled. Disable selinux.
Manual configuration of eth0 can be done as follows:
ifconfig eth0 192.168.1.1 netmask 255.255.255.0
ifconfig eth0 up
Now try to ping the interface.
Which version of xen are you using ?
On 1/3/06, Jayesh Salvi <
jayeshsalvi@xxxxxxxxx> wrote:> Try to manually configure the eth0 inside domU and see if it helps.
Sorry, I don't know exactly how to do it. Could you elaborate on how to manually configure eth0?
Thanks for pointing out the custom mac address question.
Can anyone tell me about these error messages from xend-hotplug.log
xenstore-read: couldn't read path backend/vbd/5/777/physical-device
xenstore-read: couldn't read path backend/vif/5/0/ip
xenstore-read: couldn't read path backend/vif/5/0/bridge
xenstore-read: couldn't read path backend/vbd/5/777/physical-device
[After I shutdown the domain I further get]
xenstore-read: couldn't read path backend/vif/5/0/ip
xenstore-read: couldn't read path backend/vif/5/0/bridge
interface vif5.0 does not exist!
I think "couldn't read path backend/vif/5/0/ip " should really have to do with this IP problem. But I don't understand which path is this? Is it a path somewhere on root file system?
On 1/3/06, Anand <
xen.mails@xxxxxxxxx> wrote:
>I have started domU successfully. I am using the default
xend-config.sxp, it uses >(network-script network-bridge). But my domU
doesn't get any IP information, and it's >disconnected from dom0 and
rest of the world.
Try to manually configure the eth0 inside domU and see if it helps.
>(Also I don't understand where the domU gets its MAC address 00:16:3E:56:79:71? Could >anyone explain that as well?)
You can setup a custom mac address by using the option vif = ['mac=FF:FE:00:18:98:FB, bridge=xenbr0'] inside the domU config file. Substitute the mac address after the mac= for the desired mac address.
--
regards,
Anand
Jayesh
--
regards,
Anand
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
