Re: [Xen-users] Backend device not found!!.

[Timo Virtaneva <timo@xxxxxxxxxxxx>]

Hi

I got same message in my tests. The reason was, that the bridge was missing or 
actually it had wrong name.

You should define the bridge name in the config file
like vif = [ 'bridge=xenwlan' ]. You can look what you have in you system with: 
brctl show.

I'm only using bridged environment so I'm not sure about routing and NAT.

-- Timo


----- Lamia M.Youseff <lyouseff@xxxxxxxxxxx> kirjoitti:
> Hi All,
> I am having a really hard time starting xen-domain with a vbd file. I
> 
> always get the error
> "Error: Device 0 (vif) could not be connected. Backend device not
> found."
> I have been using xen 2.0 before, but now i am not able to start
> domains 
> with xen 3.
> I have no clue what could be the problem. I have done some testing, 
> which is shown in the log below.
> 
> Any ideas/ help will be very appreciated,
> Lamia Youseff
> 
> ===================================
> -bash-3.00# cat xen-domain.config
> kernel = "/boot/vmlinuz-2.6-xenU"
> memory = 128
> name = "xen3-vm1"
> nics = 1
> ip = "10.1.1.13"
> netmask=get_current_ipmask()
> gateway=get_current_ipgw()
> hostname="xen3-vm1"
> disk = ['phy:vg2/vmdisk1,sda1,w']
> root = "/dev/sda1 ro"
> vif = ['mac=00:16:3E:F6:BB:B3, bridge=xenbr0' ]
> ===============================================
> -bash-3.00# xm create xen-domain.config
> Using config file "xen-domain.config".
> Error: Device 0 (vif) could not be connected. Backend device not
> found.
> ================================================
> -bash-3.00# xm list
> Name                              ID Mem(MiB) VCPUs State  Time(s)
> Domain-0                           0      142     4 r-----   536.0
> xen3-vm1                           5      128     1 --p---     0.0
> ===============================================
> -bash-3.00# blockdev --getsize /dev/vg2/vmdisk1
> 2097152
> ===============================================
> -bash-3.00# lvs
>   LV      VG   Attr   LSize Origin Snap%  Move Log Copy%
>   vmdisk1 vg2  -wi-ao 1.00G
> -bash-3.00# lvscan
>   ACTIVE            '/dev/vg2/vmdisk1' [1.00 GB] inherit
> =================================================
> -bash-3.00# xm destroy 5
> -bash-3.00# mount /dev/vg2/vmdisk1 /mnt/vmdisk/
> -bash-3.00# cat /mnt/vmdisk/
> ..autofsck   etc/        lib64/      opt/        tmp/
> bin/        home/       lost+found/ proc/       usr/
> boot/       initrd/     media/      root/       var/
> dev/        lib/        mnt/        sbin/
> -bash-3.00# cat /mnt/vmdisk/etc/fstab
> # This file is edited by fstab-sync - see 'man fstab-sync' for
> details
> /dev/sda1             /                   ext2           
> defaults            1  1
> /boot         /boot               ext2           defaults            1
>  2
> LABEL=/tmp          /tmp                ext2           
> defaults            1  2
> LABEL=/usr          /usr                ext2           
> defaults            1  2
> LABEL=/var          /var                ext2           
> defaults            1  2


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users