[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] networking problem, 2 nics , DMZ, internal net
On Fri, 2006-02-10 at 02:52 -0700, John R. Shannon wrote: > barryns2@xxxxxxxxxxxx wrote: > > here is the problem. > > > > I am running a dom0 with two nics > > > > eth0 wants to be my external if and I want to have 1 or more domU's on this > > network as a DMZ > > > > eth1 wants to connect to a switch for my internal network, but I want one > > domU in this network to run as a samba PDC > > > > how can I set this up? do I use bridging, routing, or routed nat, or some > > combination. > > > > Thanks, > > Barry S > > > > > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@xxxxxxxxxxxxxxxxxxx > > http://lists.xensource.com/xen-users > > > This is the same setup I have. > > Set up two bridges, one bridge includes eth0 the other eth1. Each domU > will have a virtual interface included in each bridge. For example: > > > domain0$ xm vif-list www > (vif (idx 0) (vif 0) (mac aa:00:00:00:00:02) (vifname vif2.0) (bridge > bridge0) (evtchn 22 4) (index 0)) > (vif (idx 1) (vif 1) (mac aa:00:00:00:01:02) (vifname vif2.1) (bridge > bridge1) (evtchn 23 5) (index 1)) > > Do not enable packet forwarding. > with this setup are both interfaces on the same network? I would like the dmz to be on a different network than the local net. this is my vision, does it make sense? internet | router | mail(domU.0)-----if1-----www(domU.0) computer if2-----smb-pdc(domU.1) | switch ____________|___________ | | | Hst1 Hst2 Hst3 _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |