RE: [Xen-users] Xen and Promise SATA

["John Cianfarani" <jcianfarani@xxxxxxxxxx>]

When I recompile the Xen kernel I use make ARCH=xen menuconfig and then
make KERNELS="linux-2.6-xen0 linux-2.6-xenU" kernels to recompile.  I
then link the xen0 kernel to /usr/src/linux (as that is where the
manufacturers make looks.

After rebooting into the xen0 kernel I run just a 'make' on Promises
drivers and copy the ulsata2.ko into the
/lib/modules/2.6.12-xen0/kernel/drivers/scsi and run a depmod -a on
2.6.12-xen0

This is how promises readme says to do it.
Should I be trying to compile their drivers with 'make ARCH=xen'?

Thanks
John

-----Original Message-----
From: Greg Brackley
[mailto:greg.brackley-sender-88fc1f@xxxxxxxxxxxxxxxxxxxx] 
Sent: Friday, March 03, 2006 5:54 AM
To: John Cianfarani
Subject: Re: [Xen-users] Xen and Promise SATA

----- Original Message ----- 
From: John Cianfarani
> When I try to recompile the driver for the xen kernel it compiles
without 
> errors

Don't know what command line you are using (and I have never compiled
this 
driver), but are you including "ARCH=xen". 



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users