[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Failed to bring up eth0. with http://packages.debianbase.de



Hello Ralph,

sorry, it seems to be a dhcp configuration failure. Your packages are fine!

Thanks for your help 

Nadja

Am Donnerstag, 9. März 2006 13:50 schrieb Nadja Kick:
> Am Donnerstag, 9. März 2006 12:31 schrieb Ralph Passgang:
> > Am Donnerstag, 9. März 2006 02:16 schrieb Nadja Kick:
> > > I use deb http://packages.debianbase.de/stable/i386/xen3 ./
> > > for sarge dom0/U install.
> > >
> > > domU boot shows
> > >
> > > Configuring network interfaces...NET: Registered protocol family 17
> > > Failed to bring up eth0.
> >
> > domU shows that?
>
> yes, while booting you can see
> Mounting local filesystems...
> Cleaning /tmp /var/run /var/lock.
> Setting up networking...done.
> Setting up IP spoofing protection: rp_filter.
> Configuring network interfaces...NET: Registered protocol family 17
> Failed to bring up eth0.
> done.
>
> > have you configured "vif =" statement in your domU config?
>
> yes, cat /etc/xen/sarge01.cfg
>
> kernel = "/boot/vmlinuz-2.6.12.6-xen"
> ramdisk = "/boot/xen-modules-2.6.12.6-xen"
> maxmem=400
> memory = 320
> name = "sarge01"
> vif = [ '' ]
> disk = ['file:/vd/sarge01.vd,hda3,w','file:/vd/sarge01.sd,hda2,w']
> vtpm = [ 'instance=1,backend=0' ]
> hostname="sarge01"
> root = "/dev/hda3 ro"
> extra = "2"
>
> using routing not bridging:
> cat /etc/xen/xend-config.sxp
> (xend-relocation-server yes)
> (xend-relocation-hosts-allow '^localhost$')
> (dom0-cpus 0)
> (dom0-min-mem 64)
> (network-script 'network-nat dhcp=yes')
> (vif-script 'vif-nat dhcp=yes')
>
> here the grub configuration:
> title        Xen 3.0.1 - Linux 2.6.12.6-xen
>     root                (hd0,0)
>     kernel      /xen-3.0.1.gz
>     module      /vmlinuz-2.6.12.6-xen root=/dev/hda3 ro xencons=off
> console=tty0 console=ttyS0,57600
>     module      /xen-modules-2.6.12.6-xen
>
> > have you configured /etc/network/interfaces in your domU?
>
> yes, same sarge domU (with another kernel/ramdisk) works on fedora xen/dom0
>
> > please provide a bit more information if possible... are you using debian
> > sarge as dom0? do you use hotplug or udev? if udev, which version
> > exactly?
>
> i am using sarge dom0/U with hotplug Version: 0.0.20040329-22
>
>
> I tried the 3.0.1 binaries from xensource, but same result.
>
> Nadja
>
> > --Ralph
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.