[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] vif-route/networking-route question


i set up dom0 to use vif-route and network-route instead of bridging
with eth0 =

I created two domU's, xen-dom1 with vif = [ 'ip=' ] and
xen-dom2 with vif = [ 'ip=' ].

As expected, vif-route sets two static routes for vif7.0 and vif2.0:

---<snip>--- dev vif7.0  scope link  src dev vif2.0  scope link  src dev eth0  proto kernel  scope link  src
default via dev eth0

>From within dom0 i can:
- ping
- ping
- ping (which is an external machine)

>From within i can:
- ping
- ping  does not work
- ping  does not work

>From within xen-dom1 i can:
- ping
- ping
- ping
- ping   does not work

>From within xen-dom2 i can:
- ping
- ping
- ping
- ping   does not work

vif-route does not set /proc/sys/net/ipv4/ip_forward to 1 as 
expected ([1]), so i does that by myself.

Any ideas why i cannot reach from within domU?



Timo Benk
Fax:   +49-(0)12120-152802
Mobil: +49-(0)178-8066638
PGP Public Key: http://vs241071.vserver.de/timo_benk_gpg_key.asc

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.