Re: [Xen-users] Debian DomU no network and modprobe errors on xm create

[Simon <greminn@xxxxxxxxx>]

On 4/1/06, Andrej Radonic <andrej.radonic@xxxxxxxx> wrote:
> Simon wrote:
> > Hi There, I have my debian sarge dom0 on a IBM xSeries 206 with a SATA
> > drive (seen as /dev/sda) working just peachy with the xen 3.0.1
> > packages from http://packages.debianbase.de/. I have followed the
> > instructions for creating a debian domU from these sources:
> >
> > http://wiki.xensource.com/xenwiki/DebianDomU
> > http://www.howtoforge.com/perfect_setup_xen3_debian_p4
> >
> > This is now my current domU config file:
> >
> > name="dev-domU"
> > kernel="/boot/xen-linux-2.6.12.6-xen"
> > root="/dev/hda1"
> > memory=512
> > disk=[ 'phy:/dev/xenvg/domu1,hda1,w',
> >        'phy:/dev/xenvg/domu1-swap,hda2,w' ]
> > vif=[ '' ]
> > dhcp="off"
> > ip="192.168.1.100"
> >
> Simon,
> the "IP" Parameter is no longer allowed outside the "vif" statement.
> Comment  it out and see if networking comes up after stopping / starting
> (not "restart"-ing) your domU

Thanks for the TIP, iv updated the conf file to have:

vif=['ip=192.168.1.100']

and removed the old line, but still no go. Will keep playing here.

Simon

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users