[Xen-users] Re: peth0 transmit timed out, @cea56200 length 80000042 status 00000042, help please?

["Chris Fanning" <christopher.fanning@xxxxxxxxx>]

For the record.

> I've tried both pci=noacpi and acpi=off
opps syntax, that should have been noacpi, but still didn't help :(

So, after moving the network card onto another slot (same problem
again), I changed the ethernet card for another one.
It was a: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
I tried a different: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
same problem.
Then I tried a: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 64)
same problem.
Then a: D-Link System Inc RTL8139 Ethernet (rev 10)
and now it works! no "peth0 transmit timed out" errors

#lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS]
661FX/M661FX/M661MX Host (rev 11)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port
(virtual PCI-to-PCI bridge)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964
[MuTIOL Media IO] (rev 36)
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA (rev 01)
0000:00:09.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon
RV100 QY [Radeon 7000/VE]

note: I've two nics.
The built-in: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
never gave me any trouble. I was having problems with the second card
(on a pci slot).

My kernel config is attached if it interests anyone.

Regards.
Chris.

On 5/26/06, Chris Fanning <christopher.fanning@xxxxxxxxx> wrote:
> thanks Julien,
>
> I've tried both pci=noacpi and acpi=off
> I've also moved the network card onto another slot.
> I'm still getting the same error messages but now the connection
> doesn't get lost.
>
> this is on a xen3.0.2-2
> I'm ftping a big tarball onto dom0
>
> watching the network traffic, it slows right down, almost to a stop,
> then I get the errors on dom0 console and the network picks up again.
>
> any thoughts?
>
> Cheers.
> Chris.
>
> On 5/25/06, Chris Fanning <christopher.fanning@xxxxxxxxx> wrote:
> > Hello list,
> >
> > I have network problems on dom0
> > I discovered this trying to copy user's homes from another box onto dom0.
> > I have tried this via mouting tcp nfs and also via ftp. Both methods
> > give me the same problem.
> >
> > When I try to send lots of continuos traffic the tcp connection bottoms out.
> > I get this on dom0
> >
> > peth0 transmit timed out, tx_status 00 status e000
> > diagnostic: net 04cc media 8880 dma 000000a0 fifo 0000
> > Flags; bus-master 1, dirty 194608(0) current 194624(0)
> > Transmit list 0f83b200 vs. cea56200.
> > 0: @cea56200  length 80000042 status 00000042
> > 1: @cea562a0  length 80000042 status 00000042
> > .....
> > 10: @cea56840  length 80000042 status 00000042
> > 11: @cea568e0  length 80000042 status 00000042
> > 12: @cea56980  length 80000042 status 00000042
> > 13: @cea56a20  length 80000042 status 00000042
> > 13: @cea56ac0  length 80000042 status 00000042
> > 14: @cea56b60  length 80000042 status 00000042
> > 15: @cea56b60  length 80000042 status 00000042
> >
> >
> > help?
> > Thank you
> > Chris.
> >

Attachment: config-2.6.16-xen
Description: Binary data

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users