[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Re: new domain respawns with xen3.0 on ubuntu


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: "Tijl Van den Broeck" <subspawn@xxxxxxxxx>
  • Date: Tue, 30 May 2006 15:50:36 +0200
  • Delivery-date: Tue, 30 May 2006 06:51:20 -0700
  • Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=CwmcWmSywQq66D9MjftySayjcCgRsIkUqYqPqs9qWHrcIXmgCYXhBoPqJVsdBHTooqAr9W3bq+tcQitLJXYrBl60JKFhTtrtWfIsXEOgsNSdJw5CEb7hiWCizKLTo3sCKDzDq50VNLG9GbVmIimOpIKsSQZGdwUk5CA+4t/rwhQ=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

You need to fix your inittab before booting the xen domU.

/mnt/domu/etc/inittab:
1:2345:respawn:/sbin/getty 38400 console

and comment the other 1-6 out. Now you've got yourself a console and booting should work.

greetings




On 5/30/06, Hardeep Singh < hardeepguru@xxxxxxxxx> wrote:
ooppss..!! posted the wrong fstab!

The one for this domain is:

/dev/hda1               /               ext3    defaults        1       2
/dev/hda2               none            swap    sw            0       0
/dev/pts                devpts          gid=5,mode=620    0       0
none                    /dev/shm        tmpfs   defaults     0       0

The one the previous post is the dom0 one!

Regards,
Hardeep


On 5/29/06, Hardeep Singh < hardeepguru@xxxxxxxxx> wrote:
I successfully installed xen3.0 on my machines. However there are a few problems when I try to create a new domain!

The procedure I've followed is pretty much the same as given on pages 4-5 on;

http://www.howtoforge.com/perfect_setup_xen3_debian_p4

On doing a ' xm create -c /etc/xen/vm1-config.sxp vmid=1' the following is what parts of the trace look like:

NET: Registered protocol family 20
Using IPI No-Shortcut mode
EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem as ext2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 168k freed
8250: no version for "struct_module" found: kernel tainted.
8250: Unknown symbol uart_get_baud_rate
8250: Unknown symbol uart_resume_port
8250: Unknown symbol uart_register_driver
8250: Unknown symbol uart_suspend_port
8250: Unknown symbol uart_remove_one_port
8250: Unknown symbol uart_update_timeout
8250: Unknown symbol uart_unregister_driver
8250: Unknown symbol uart_get_divisor
8250: Unknown symbol uart_match_port
8250: Unknown symbol uart_add_one_port
8250: Unknown symbol uart_write_wakeup
modprobe: FATAL: Error inserting 8250 (/lib/modules/2.6.16-xen/kernel/drivers/serial/8250.ko): Unknown symbol in module, or unknown parameter (see dmesg)

INIT: version 2.86 booting
* Files under mount point '/dev/shm' will be hidden.
Will now activate swap.
swapon on /dev/hda2
swapon: cannot stat /dev/hda2: No such file or directory
* Swap activation failed with error code 255.
Will now check root file system.
fsck 1.39-WIP (31-Dec-2005)
[/sbin/fsck.ext3 (1) -- /dev/shm/root] fsck.ext3 -a -C0 /dev/shm/root
/dev/shm/root: clean, 25155/640000 files, 193537/1280000 blocks

Will now mount local filesystems.
mount: mount point devpts does not exist
none on /dev/shm type tmpfs (rw)
* Mounting local filesystems failed with error code 96.
Will now activate swapfile swap.
Done activating swapfile swap.

* /etc/network/options is deprecated.
Setting up IP spoofing protection...done (rp_filter).
Configuring network interfaces...done.
Starting portmap daemon....

Starting deferred execution scheduler: atd.
Starting periodic command scheduler....
INIT: Id "1" respawning too fast: disabled for 5 minutes
INIT: Id "2" respawning too fast: disabled for 5 minutes
INIT: Id "5" respawning too fast: disabled for 5 minutes
INIT: Id "3" respawning too fast: disabled for 5 minutes
INIT: Id "4" respawning too fast: disabled for 5 minutes
INIT: Id "6" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel
INIT: Id "1" respawning too fast: disabled for 5 minutes
INIT: Id "2" respawning too fast: disabled for 5 minutes
INIT: Id "5" respawning too fast: disabled for 5 minutes
INIT: Id "3" respawning too fast: disabled for 5 minutes
INIT: Id "4" respawning too fast: disabled for 5 minutes
INIT: Id "6" respawning too fast: disabled for 5 minutes
INIT: no more processes left in this runlevel



my /etc/fstab for this machine looks like:
proc            /proc           proc    defaults        0       0
/dev/hda1       /               ext3    defaults,errors=remount-ro 0       1
/dev/hda5       none            swap    sw              0       0

and the domain configuration file is attahed.

Any sort of help would be appreciated! I've been stuck here since pretty long :(

Regards,
Hardeep




--
hardeep




--
hardeep

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.