Re: [Xen-users] UPS serial port ttyS0

["Chris Fanning" <christopher.fanning@xxxxxxxxx>]

Hi Ranbir,

> Did you figure this one out?
No. I didn't. :(
I'm plugging the ups into another box I have on the same network. But
this is a poor cheat.

I would very much like to know how you go.
Thanks.
Chris.

On 6/10/06, Kanwar Ranbir Sandhu <m3freak@xxxxxxxxxx> wrote:
> Hi Chris,
>
> On Thu, 2006-01-06 at 12:41 +0200, Chris Fanning wrote:
> > So, I plug the UPS into dom0 serial port and change the permissions.
> >
> > # ls -l /dev/ttyS0
> > crw-rw----  1 root nut 4, 64 2006-06-01 09:55 /dev/ttyS0
> >
> > But I'm running into problems.
> > I've seen in my boot log
> >
> > "Xen virtual console successfully installed as ttyS0"
> >
> > Can someone please explain this to me?
>
> Did you figure this one out? I'm having the same problem, and even
> though I believe I've disabled the xen console, I still can't get the
> UPS to attach to ttyS0 in dom0.  Actually, ttyS0 doesn't even exist -
> I'm clued out.
>
> I've googled for this, but surprisingly I've found next to nothing.  My
> google skills in this case may be out to lunch.
>
> Anyway, if you have your UPS attached to ttyS0, I'd really appreciate it
> knowing how you did it.
>
> Regards,
>
> Ranbir
>
> --
> Kanwar Ranbir Sandhu
> Linux 2.6.16-1.2111_FC4 i686 GNU/Linux
> 10:00:01 up 3:29, 2 users, load average: 0.23, 0.07, 0.06

--
.''`.     Use Debian
: :' :
`. `'
 `-

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users