|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] DomU WinXP no network connection
Hi, Just installed Windows XP on Gentoo 2006.0 with VT support. WinXP boots up ok and virtual network interface is configured, but can't connect to anywhere even to dom0. Here are config file for domU WinXP and some logs. Any help is appreciated. Simon Gao =================================== kernel = "/usr/lib/xen/boot/hvmloader" builder='hvm' memory = 512 name = "WinXP" vif = [ 'type=ioemu, bridge=xenbr0' ] disk = [ 'file:/vms/xms/windisk.img,ioemu:hda,w' ] on_poweroff = 'destroy' on_reboot = 'destroy' on_crash = 'destroy' device_model = '/usr/lib/xen/bin/qemu-dm' #cdrom='/images/winxp/winxp_sp2.iso' boot='c' sdl=1 vnc=0 vncviewer=0 =================================== # dmesg .... xenbr0: port 3(vif1.0) entering learning state xenbr0: topology change detected, propagating xenbr0: port 3(vif1.0) entering forwarding state xenbr0: port 3(vif1.0) entering disabled state device vif1.0 left promiscuous mode xenbr0: port 3(vif1.0) entering disabled state device vif2.0 entered promiscuous mode xenbr0: port 3(vif2.0) entering learning state xenbr0: topology change detected, propagating xenbr0: port 3(vif2.0) entering forwarding state xenbr0: port 3(vif2.0) entering disabled state device vif2.0 left promiscuous mode xenbr0: port 3(vif2.0) entering disabled state device vif3.0 entered promiscuous mode xenbr0: port 3(vif3.0) entering learning state xenbr0: topology change detected, propagating xenbr0: port 3(vif3.0) entering forwarding state xenbr0: port 3(vif3.0) entering learning state xenbr0: topology change detected, propagating xenbr0: port 3(vif3.0) entering forwarding state xenbr0: port 3(vif3.0) entering disabled state device vif3.0 left promiscuous mode xenbr0: port 3(vif3.0) entering disabled state device vif4.0 entered promiscuous mode xenbr0: port 3(vif4.0) entering learning state xenbr0: topology change detected, propagating xenbr0: port 3(vif4.0) entering forwarding state xenbr0: port 3(vif4.0) entering learning state xenbr0: topology change detected, propagating xenbr0: port 3(vif4.0) entering forwarding state xenbr0: port 3(vif4.0) entering disabled state device vif4.0 left promiscuous mode xenbr0: port 3(vif4.0) entering disabled state device vif6.0 entered promiscuous mode xenbr0: port 3(vif6.0) entering learning state xenbr0: topology change detected, propagating xenbr0: port 3(vif6.0) entering forwarding state # xm dmesg __ __ _____ ___ ____ \ \/ /___ _ __ |___ / / _ \ |___ \ \ // _ \ '_ \ |_ \| | | | __) | / \ __/ | | | ___) | |_| | / __/ /_/\_\___|_| |_| |____(_)___(_)_____| http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.0.2 (root@xxxxxxxxxx) (gcc version 3.4.5 (Gentoo 3.4.5-r1, ssp-3.4.5-1.0, pie-8.7.9)) Sat Apr 22 22:02:54 PDT 2006 Latest ChangeSet: Sat Apr 8 12:14:27 2006 +0100 9598:1bce05ff1e52 (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009f000 (usable) (XEN) 000000000009f000 - 00000000000a0000 (reserved) (XEN) 0000000000100000 - 000000007fe91400 (usable) (XEN) 000000007fe91400 - 0000000080000000 (reserved) (XEN) 00000000e0000000 - 00000000f0007000 (reserved) (XEN) 00000000f0008000 - 00000000f000c000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fed20000 - 00000000feda0000 (reserved) (XEN) 00000000fee00000 - 00000000fee10000 (reserved) (XEN) 00000000ffb00000 - 0000000100000000 (reserved) (XEN) System RAM: 2046MB (2095296kB) (XEN) Xen heap: 10MB (10572kB) (XEN) Using scheduler: Simple EDF Scheduler (sedf) (XEN) PAE disabled. (XEN) DMI 2.4 present. (XEN) Using APIC driver default (XEN) ACPI: RSDP (v000 DELL ) @ 0x000fc370 (XEN) ACPI: RSDT (v001 DELL M07 0x27d60317 ASL 0x00000061) @ 0x7fe91a11 (XEN) ACPI: FADT (v001 DELL M07 0x27d60317 ASL 0x00000061) @ 0x7fe92800 (XEN) ACPI: MADT (v001 DELL M07 0x27d60317 ASL 0x00000047) @ 0x7fe93000 (XEN) ACPI: ASF! (v016 DELL M07 0x27d60317 ASL 0x00000061) @ 0x7fe92c00 (XEN) ACPI: MCFG (v016 DELL M07 0x27d60317 ASL 0x00000061) @ 0x7fe92fc0 (XEN) ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7fe91a8c (XEN) ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x00000000 (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 6:14 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 6:14 APIC version 20 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Initializing CPU#0 (XEN) Detected 1997.384 MHz processor. (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 2048K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) VMXON is done (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 (XEN) Booting processor 1/1 eip 90000 (XEN) Initializing CPU#1 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 2048K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 1 (XEN) VMXON is done (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Intel Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 2 CPUs: (XEN) CPU#0 had 0 usecs TSC skew, fixed it up. (XEN) CPU#1 had 1274465 usecs TSC skew, fixed it up. (XEN) Platform timer is 1.193MHz PIT (XEN) Brought up 2 CPUs (XEN) Machine check exception polling timer started. (XEN) Using IPI Shortcut mode (XEN) *** LOADING DOMAIN 0 *** (XEN) Domain 0 kernel supports features = { 0000001f }. (XEN) Domain 0 kernel requires features = { 00000000 }. (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 7f000000->7f800000 (128983 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c044463c (XEN) Init. ramdisk: c0445000->c0445000 (XEN) Phys-Mach map: c0445000->c04c4f5c (XEN) Start info: c04c5000->c04c6000 (XEN) Page tables: c04c6000->c04c9000 (XEN) Boot stack: c04c9000->c04ca000 (XEN) TOTAL: c0000000->c0800000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Dom0 has maximum 2 VCPUs (XEN) Scrubbing Free RAM: .....................done. (XEN) Xen trace buffers: disabled (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). (XEN) (GUEST: 2) HVM Loader (XEN) (GUEST: 2) Loading ROMBIOS ... (XEN) (GUEST: 2) Loading Cirrus VGABIOS ... (XEN) (GUEST: 2) Loading VMXAssist ... (XEN) (GUEST: 2) VMX go ... (XEN) (GUEST: 2) VMXAssist (Jun 9 2006) (XEN) (GUEST: 2) Memory size 256 MB (XEN) (GUEST: 2) E820 map: (XEN) (GUEST: 2) 0000000000000000 - 000000000009F800 (RAM) (XEN) (GUEST: 2) 000000000009F800 - 00000000000A0000 (Reserved) (XEN) (GUEST: 2) 00000000000A0000 - 00000000000C0000 (Type 16) (XEN) (GUEST: 2) 00000000000F0000 - 0000000000100000 (Reserved) (XEN) (GUEST: 2) 0000000000100000 - 000000000FFFE000 (RAM) (XEN) (GUEST: 2) 000000000FFFE000 - 000000000FFFF000 (Type 18) (XEN) (GUEST: 2) 000000000FFFF000 - 0000000010000000 (Type 17) (XEN) (GUEST: 2) 0000000010000000 - 0000000010003000 (ACPI NVS) (XEN) (GUEST: 2) 0000000010003000 - 000000001000D000 (ACPI Data) (XEN) (GUEST: 2) 00000000FEC00000 - 0000000100000000 (Type 16) (XEN) (GUEST: 2) (XEN) (GUEST: 2) Start BIOS ... (XEN) (GUEST: 2) Starting emulated 16-bit real-mode: ip=F000:FFF0 (XEN) (GUEST: 2) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ (XEN) HVM_PIT: guest freq in cycles=99869116 (XEN) (GUEST: 2) Remapping master: ICW2 0x8 -> 0x20 (XEN) (GUEST: 2) Remapping slave: ICW2 0x70 -> 0x28 (XEN) (GUEST: 2) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ (XEN) (GUEST: 2) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ (XEN) (GUEST: 2) (XEN) (GUEST: 2) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63 (XEN) (GUEST: 2) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes) (XEN) (GUEST: 2) ata0 slave: Unknown device (XEN) (GUEST: 2) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) (GUEST: 2) ata1 slave: Unknown device (XEN) (GUEST: 2) (XEN) (GUEST: 2) Booting from CD-Rom... (XEN) (GUEST: 2) unsupported PCI BIOS function 0x0E (XEN) (GUEST: 2) int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) (GUEST: 2) KBD: int09h_handler(): unknown scancode read! (XEN) HVM_PIT: guest freq in cycles=20002616 (XEN) (GUEST: 3) HVM Loader (XEN) (GUEST: 3) Loading ROMBIOS ... (XEN) (GUEST: 3) Loading Cirrus VGABIOS ... (XEN) (GUEST: 3) Loading VMXAssist ... (XEN) (GUEST: 3) VMX go ... (XEN) (GUEST: 3) VMXAssist (Jun 9 2006) (XEN) (GUEST: 3) Memory size 256 MB (XEN) (GUEST: 3) E820 map: (XEN) (GUEST: 3) 0000000000000000 - 000000000009F800 (RAM) (XEN) (GUEST: 3) 000000000009F800 - 00000000000A0000 (Reserved) (XEN) (GUEST: 3) 00000000000A0000 - 00000000000C0000 (Type 16) (XEN) (GUEST: 3) 00000000000F0000 - 0000000000100000 (Reserved) (XEN) (GUEST: 3) 0000000000100000 - 000000000FFFE000 (RAM) (XEN) (GUEST: 3) 000000000FFFE000 - 000000000FFFF000 (Type 18) (XEN) (GUEST: 3) 000000000FFFF000 - 0000000010000000 (Type 17) (XEN) (GUEST: 3) 0000000010000000 - 0000000010003000 (ACPI NVS) (XEN) (GUEST: 3) 0000000010003000 - 000000001000D000 (ACPI Data) (XEN) (GUEST: 3) 00000000FEC00000 - 0000000100000000 (Type 16) (XEN) (GUEST: 3) (XEN) (GUEST: 3) Start BIOS ... (XEN) (GUEST: 3) Starting emulated 16-bit real-mode: ip=F000:FFF0 (XEN) (GUEST: 3) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ (XEN) HVM_PIT: guest freq in cycles=99869116 (XEN) (GUEST: 3) Remapping master: ICW2 0x8 -> 0x20 (XEN) (GUEST: 3) Remapping slave: ICW2 0x70 -> 0x28 (XEN) (GUEST: 3) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ (XEN) (GUEST: 3) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ (XEN) (GUEST: 3) (XEN) (GUEST: 3) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63 (XEN) (GUEST: 3) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes) (XEN) (GUEST: 3) ata0 slave: Unknown device (XEN) (GUEST: 3) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) (GUEST: 3) ata1 slave: Unknown device (XEN) (GUEST: 3) (XEN) (GUEST: 3) Booting from CD-Rom... (XEN) (GUEST: 3) unsupported PCI BIOS function 0x0E (XEN) (GUEST: 3) int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) HVM_PIT: guest freq in cycles=20002616 (XEN) HVM_PIT: guest freq in cycles=2003777 (XEN) HVM_PIT: guest freq in cycles=20002616 (XEN) HVM_PIT: guest freq in cycles=2003777 (XEN) HVM_PIT: guest freq in cycles=20002616 (XEN) (GUEST: 4) HVM Loader (XEN) (GUEST: 4) Loading ROMBIOS ... (XEN) (GUEST: 4) Loading Cirrus VGABIOS ... (XEN) (GUEST: 4) Loading VMXAssist ... (XEN) (GUEST: 4) VMX go ... (XEN) (GUEST: 4) VMXAssist (Jun 9 2006) (XEN) (GUEST: 4) Memory size 256 MB (XEN) (GUEST: 4) E820 map: (XEN) (GUEST: 4) 0000000000000000 - 000000000009F800 (RAM) (XEN) (GUEST: 4) 000000000009F800 - 00000000000A0000 (Reserved) (XEN) (GUEST: 4) 00000000000A0000 - 00000000000C0000 (Type 16) (XEN) (GUEST: 4) 00000000000F0000 - 0000000000100000 (Reserved) (XEN) (GUEST: 4) 0000000000100000 - 000000000FFFE000 (RAM) (XEN) (GUEST: 4) 000000000FFFE000 - 000000000FFFF000 (Type 18) (XEN) (GUEST: 4) 000000000FFFF000 - 0000000010000000 (Type 17) (XEN) (GUEST: 4) 0000000010000000 - 0000000010003000 (ACPI NVS) (XEN) (GUEST: 4) 0000000010003000 - 000000001000D000 (ACPI Data) (XEN) (GUEST: 4) 00000000FEC00000 - 0000000100000000 (Type 16) (XEN) (GUEST: 4) (XEN) (GUEST: 4) Start BIOS ... (XEN) (GUEST: 4) Starting emulated 16-bit real-mode: ip=F000:FFF0 (XEN) (GUEST: 4) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ (XEN) HVM_PIT: guest freq in cycles=99869116 (XEN) (GUEST: 4) Remapping master: ICW2 0x8 -> 0x20 (XEN) (GUEST: 4) Remapping slave: ICW2 0x70 -> 0x28 (XEN) (GUEST: 4) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ (XEN) (GUEST: 4) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ (XEN) (GUEST: 4) (XEN) (GUEST: 4) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63 (XEN) (GUEST: 4) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes) (XEN) (GUEST: 4) ata0 slave: Unknown device (XEN) (GUEST: 4) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) (GUEST: 4) ata1 slave: Unknown device (XEN) (GUEST: 4) (XEN) (GUEST: 4) Booting from CD-Rom... (XEN) (GUEST: 4) unsupported PCI BIOS function 0x0E (XEN) (GUEST: 4) int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) HVM_PIT: guest freq in cycles=20002616 (XEN) HVM_PIT: guest freq in cycles=2003777 (XEN) HVM_PIT: guest freq in cycles=20002616 (XEN) (GUEST: 6) HVM Loader (XEN) (GUEST: 6) Loading ROMBIOS ... (XEN) (GUEST: 6) Loading Cirrus VGABIOS ... (XEN) (GUEST: 6) Loading VMXAssist ... (XEN) (GUEST: 6) VMX go ... (XEN) (GUEST: 6) VMXAssist (Jun 9 2006) (XEN) (GUEST: 6) Memory size 512 MB (XEN) (GUEST: 6) E820 map: (XEN) (GUEST: 6) 0000000000000000 - 000000000009F800 (RAM) (XEN) (GUEST: 6) 000000000009F800 - 00000000000A0000 (Reserved) (XEN) (GUEST: 6) 00000000000A0000 - 00000000000C0000 (Type 16) (XEN) (GUEST: 6) 00000000000F0000 - 0000000000100000 (Reserved) (XEN) (GUEST: 6) 0000000000100000 - 000000001FFFE000 (RAM) (XEN) (GUEST: 6) 000000001FFFE000 - 000000001FFFF000 (Type 18) (XEN) (GUEST: 6) 000000001FFFF000 - 0000000020000000 (Type 17) (XEN) (GUEST: 6) 0000000020000000 - 0000000020003000 (ACPI NVS) (XEN) (GUEST: 6) 0000000020003000 - 000000002000D000 (ACPI Data) (XEN) (GUEST: 6) 00000000FEC00000 - 0000000100000000 (Type 16) (XEN) (GUEST: 6) (XEN) (GUEST: 6) Start BIOS ... (XEN) (GUEST: 6) Starting emulated 16-bit real-mode: ip=F000:FFF0 (XEN) (GUEST: 6) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ (XEN) HVM_PIT: guest freq in cycles=99869116 (XEN) (GUEST: 6) Remapping master: ICW2 0x8 -> 0x20 (XEN) (GUEST: 6) Remapping slave: ICW2 0x70 -> 0x28 (XEN) (GUEST: 6) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ (XEN) (GUEST: 6) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date: 2005/05/07 15:55:26 $ (XEN) (GUEST: 6) (XEN) (GUEST: 6) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63 (XEN) (GUEST: 6) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes) (XEN) (GUEST: 6) ata0 slave: Unknown device (XEN) (GUEST: 6) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) (GUEST: 6) ata1 slave: Unknown device (XEN) (GUEST: 6) (XEN) (GUEST: 6) Booting from Hard Disk... (XEN) (GUEST: 6) unsupported PCI BIOS function 0x0E (XEN) (GUEST: 6) int13_harddisk: function 15, unmapped device for ELDL=81 (XEN) HVM_PIT: guest freq in cycles=20002616 _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |