[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] second interface eth1 does not work in domU (xen 3.0.2 binary install in mandriva 2006)
i tried to set up 2 bridged nics in my domU as specified in: http://wiki.xensource.com/xenwiki/XenNetworking 1. In /etc/xen/xend-config.sxp: (network-script my-network-script) 2. my-network-script should read #!/bin/sh dir=$(dirname "$0") "$dir/network-bridge" "$@" vifnum=0 "$dir/network-bridge" "$@" vifnum=1 3. restart xend and xendomains 4. in domU config: vif = [ 'ip=128.48.123.146, bridge=xenbr0', 'ip=128.48.106.156, bridge=xenbr1' ] 5. lo behold, i got 2 nics in domUI (both eth0 and eth1 works fine in dom0 so there is no physical problem). unfortunately, eth1 does not work, as it only send and does not receive, while eth0 works fine as before. eth0 Link encap:Ethernet HWaddr 00:16:3E:5F:DD:08 inet addr:128.48.123.146 Bcast:128.48.123.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe5f:dd08/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:103409 errors:0 dropped:0 overruns:0 frame:0 TX packets:96862 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32282091 (30.7 MiB) TX bytes:22077403 (21.0 MiB) eth1 Link encap:Ethernet HWaddr 00:16:3E:7B:13:B2 inet addr:128.48.106.156 Bcast:128.48.106.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe7b:13b2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:1056 (1.0 KiB) any suggestions would be most welcome: John Shen 510-326-8473 Fax: 510-987-9612 System Coordinator, Online Information System Student Affairs, University of California, Office of the President _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |