RE: [Xen-users] Target filesystem doesn't have /sbin/init

["Mohamed-Amine Kadimi" <gnu.linux@xxxxxxxxxxx>]

any help please


> From: "Mohamed-Amine Kadimi" <gnu.linux@xxxxxxxxxxx>
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-users] Target filesystem doesn't have /sbin/init
> Date: Sat, 02 Sep 2006 08:32:01 +0000
>
> Hello
> I installed xen successfully under debian etch and used it for a few days 
> whith a centOS 4 domU, then i decided to remove/reinstall it. all the steps 
> was successfully done but when i attempt to start the centOS domU it 
> stopped, there is the boot lines, i hope i can find a help
> # xm create vhCentos.cfg -c
> Using config file "/etc/xen/vhCentos.cfg".
> Started domain vhCentos
> Linux version 2.6.16-2-xen-k7 (Debian 2.6.16-17) (waldi@xxxxxxxxxx) (gcc 
> version 4.0.4 20060630 (prerelease) (Debian 4.0.3-4)) #1 SMP Sun Jul 16 
> 02:14:54 UTC 2006
> BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 0000000008000000 (usable)
> 0MB HIGHMEM available.
> 136MB LOWMEM available.
> ACPI in unprivileged domain disabled
> IRQ lockup detection disabled
> Built 1 zonelists
> Kernel command line:  root=/dev/sda1 ro
> Enabling fast FPU save and restore... done.
> Initializing CPU#0
> PID hash table entries: 1024 (order: 10, 16384 bytes)
> Xen reported: 1302.299 MHz processor.
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Software IO TLB disabled
> vmalloc area: b9000000-fb7fe000, maxmem 43ffe000
> Memory: 116376k/139264k available (1519k kernel code, 14544k reserved, 531k 
> data, 148k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... 
> Ok.
> Calibrating delay using timer specific routine.. 3264.75 BogoMIPS 
> (lpj=6529508)
> Security Framework v1.0.0 initialized
> SELinux:  Disabled at boot.
> Capability LSM initialized
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> Checking 'hlt' instruction... OK.
> Brought up 1 CPUs
> migration_cost=0
> checking if image is initramfs... it is
> Freeing initrd memory: 10170k freed
> Grant table initialized
> NET: Registered protocol family 16
> PCI: setting up Xen PCI frontend stub
> ACPI: Subsystem revision 20060127
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI: disabled
> xen_mem: Initialising balloon driver.
> PCI: System does not support PCI
> PCI: System does not support PCI
> audit: initializing netlink socket (disabled)
> audit(1157184637.373:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Initializing Cryptographic API
> io scheduler noop registered
> io scheduler anticipatory registered (default)
> io scheduler deadline registered
> io scheduler cfq registered
> PNP: No PS/2 controller found. Probing ports directly.
> i8042.c: No controller found.
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> Xen virtual console successfully installed as tty1
> Event-channel device installed.
> blkif_init: reqs=64, pages=704, mmap_vstart=0xb0400000
> netfront: Initialising virtual ethernet driver.
> NET: Registered protocol family 2
> Registering block device major 8
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> TCP established hash table entries: 8192 (order: 4, 65536 bytes)
> TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
> TCP: Hash tables configured (established 8192 bind 8192)
> TCP reno registered
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> NET: Registered protocol family 8
> NET: Registered protocol family 20
> Using IPI Shortcut mode
> Freeing unused kernel memory: 148k freed
> Loading, please wait...
> Begin: Loading essential drivers... ...
> Done.
> Begin: Running /scripts/init-premount ...
> FATAL: Error inserting fan 
> (/lib/modules/2.6.16-2-xen-k7/kernel/drivers/acpi/fan.ko): No such device
> FATAL: Error inserting thermal 
> (/lib/modules/2.6.16-2-xen-k7/kernel/drivers/acpi/thermal.ko): No such 
> device
> Done.
> Begin: Mounting root file system... ...
> Begin: Running /scripts/local-top ...
> Done.
> Begin: Running /scripts/local-premount ...
> Done.
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Begin: Running /scripts/local-bottom ...
> Done.
> Done.
> Begin: Running /scripts/init-bottom ...
> mount: Mounting /root/dev on /dev/.static/dev failed: No such file or 
> directory
> Done.
> Target filesystem doesn't have /sbin/init
>
>
> BusyBox v1.1.3 (Debian 1:1.1.3-2) Built-in shell (ash)
> Enter 'help' for a list of built-in commands.
>
> /bin/sh: can't access tty; job control turned off
> (initramfs)
>
>
>
> and the vhCentos.cfg :
>
> kernel  = '/boot/vmlinuz-2.6.16-2-xen-k7'
> ramdisk = '/boot/initrd.img-2.6.16-2-xen-k7'
> memory  = '128'
>
> root    = '/dev/sda1 ro'
>
> disk    = [ 'file:/mnt/xen/domains/vhCentos/disk.img,sda1,w', 
> 'file:/mnt/xen/domains/vhCentos/swap.img,sda2,w' ]
> name    = 'vhCentos'
>
> vif  = [ 'ip=192.168.0.101' ]
>
> on_poweroff = 'destroy'
> on_reboot   = 'restart'
> on_crash    = 'restart'
>
> _________________________________________________________________
> Express yourself instantly with MSN Messenger! Download today it's FREE! 
> http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar - get it now! 
http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users