[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] "received packet with own address as source address"



On Fri, 2006-10-27 at 18:47 -0300, Tiago Cruz wrote:

> The MRTG point to my machine with XEN running one absurd volume of
> output data sent (normal is around 6 MB/s) and when XEN is working we
> get 80 MB/s until my DRAC is alive... after this, the machine crash,
> DRAC stop do reply, swith stop do work together... 

dmesg messages:

printk2: 2 messages suppressed
vif0.0: "received packet with own address as source address"
printk2: 4775 messages suppressed
vif0.0: "received packet with own address as source address"
printk2: 165845 messages suppressed
vif0.0: "received packet with own address as source address"
printk2: 186540 messages suppressed
xenbr0: port 3(eth0) entering disabled state
xenbr0: port 1(vif0.0) entering disabled state
device eth0 left promiscuous mode
audit(1161983401.126:10): dev=eth0 prom=0 old_prom=256 auid=4294967295
xenbr0: port 3(eth0) entering disabled state


sysconfig/network-scripts/ifcfg-eth0:
DEVICE=eth0
TYPE=Ethernet
BRIDGE=xenbr0
ONBOOT=yes

sysconfig/network-scripts/ifcfg-xenbr0:
DEVICE=xenbr0
TYPE=BRIDGE
BOOTPROTO=dhcp
ONBOOT=yes

Is it correct this bridge configuration?

Many thanks!!!





_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.