[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Xen Dom0 with FibreChannel (FC) can't export disk to DomU



Hello,

thanks Ulrich for your answer.

You have right, it is not the type of cable, but it is the driver!

At first, I use the kernel LSI mpt drivers.
It doesn't work, I can't export an image or a partition from Dom0 to a DomU.

Now I get the original LSI drivers from the LSI Homepage and build new fusion/mpt modules for my kernel.

What should I say: It works!!!!!!

I can now export an image or a partition from Dom0 to a DomU as hdx or sdx.

Thanks all for your help

Wish all the best
Dietmar Simons
(Neuss, Germany)


Ulrich Windl schrieb:
On 23 Nov 2006 at 16:59, Dietmar Simons wrote:

  
Hello all,

I have a problem with Xen and FibreChannel.
    

You should says "XEN and Samba". The type of cable should be irrelevant here.

  
The Dom0 can't export a Disk on a FibreChannel SAN-Box to the DomU's.

In the DomU configuration I try:

disk = [ 'phy:/dev/sdb1,/dev/sda1,w' ]
or
disk = [ 'file:/mnt/sambashare.img,sda1,w' ]

sambashare.img is a 512MB great Diskimage on a Partition on the FC-SAN-Box,
the Dom0 mount this partition on /mnt and the Filesystem is ext3.

The Xen Dom0 can mount every Partition on the FC SAN-Box.

Some information about my Server:
Dell PowerEdge 1950
FC-HBA is a 7104 from LSI
2GB RAM
DualCore Xeon
Kernel: 2.6.16.29-xen

And here the output from lsmod in DomU:

[root@samba3-1 modules]# lsmod
Module Size Used by
ipv6 254048 12
i2c_dev 11908 0
i2c_core 23808 1 i2c_dev
binfmt_misc 12808 1
dm_mirror 23120 0
dm_mod 52248 1 dm_mirror
snd_intel8x0 33820 0
snd_ac97_codec 93728 1 snd_intel8x0
snd_ac97_bus 6144 1 snd_ac97_codec
snd_pcm_oss 51616 0
snd_mixer_oss 20352 1 snd_pcm_oss
snd_pcm 88580 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 25860 1 snd_pcm
snd 53348 6 
snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 12512 1 snd
snd_page_alloc 12808 2 snd_intel8x0,snd_pcm
mptsas 23308 0
scsi_transport_sas 19584 1 mptsas
mptspi 12552 0
mptfc 16136 0
mptscsih 38608 3 mptsas,mptspi,mptfc
scsi_transport_fc 31488 1 mptfc
mptbase 51552 4 mptsas,mptspi,mptfc,mptscsih
aic79xx 283992 0
scsi_transport_spi 25728 1 aic79xx
ide_generic 5120 0 [permanent]
sd_mod 20224 0
scsi_mod 129160 9 
mptsas,scsi_transport_sas,mptspi,mptfc,mptscsih,scsi_transport_fc,aic79xx,scsi_transport_spi,sd_mod
nfs 217164 1
nfs_acl 7552 1 nfs
lockd 62600 2 nfs
sunrpc 144188 4 nfs,nfs_acl,lockd
ohci1394 35888 0
ieee1394 98872 1 ohci1394
parport_pc 40676 0
parport 38344 1 parport_pc

And here the boot messages from DomU:

INIT: version 2.85 booting
Welcome to CentOS release 4.4 (Final)
Press 'I' to enter interactive startup.
udev starten: [ OK ]
Initialisiere Hardware... Speicher Netzwerk Audio fertig[ OK ]
Kernelparameter konfigurieren: [ OK ]
Stelle Uhr (localtime) auf: Do Nov 23 16:19:02 CET 2006 [ OK ]
Rechnername samba3-1 einstellen: [ OK ]
Root-Dateisystem mit Schreib- und Lesezugriff neu einhängen: [ OK ]
no block devices found
Logical Volume Management einrichten: [ OK ]

Can any body help me???

Wish the best
Dietmar Simons

________________________________________________

Simons IT-Service
Dietmar Simons
Matthiasstr. 18a
41468 Neuss
Germany

Phone +49 2131 15 34 98
Fax +49 2131 15 34 99
Mobil +49 172 253 05 23
Email: dietmar.simons@xxxxxxxxxxxxxxxxxxxx
Internet: http://www.simons-it-service.de
________________________________________________

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
    



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

  

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.