Re: [Xen-users] NAT and Windows?

[Hugo Mills <hugo-xen@xxxxxxxxxxxxx>]

On Tue, Dec 12, 2006 at 02:33:09PM +0000, Ryan Worsley wrote:
> Howdy all,
> 
> Has anyone got xen NAT and a windows guest setup correctly?  If so could 
> I have a look at your config file?  If it's not possible could someone 
> tell me how it should be done!

   Yes, I have. The secret isn't really in the config files,
unfortunately. A quick run-down to what I do:

 - Modify network-route to add the following line:

   iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

 - Configure xend to use vif-route and network-route as the networking
scripts. (and restart xend to pick up the new configuration)

 - Then bring up your domU, and -- the main problem -- fix the network
configuration in the dom0 by taking down the unused vif interface, and
configuring the tap interface instead:

   ifconfig vif1.0 down
   ifconfig tap0 10.16.0.3 netmask 255.255.255.0 up

   Your network configuration and devices may be different -- tweak as
appropriate. Note that the IP address on tap0 should be in the same
network as the domU machine. I use 10.16.0.1 for the tap0 device, and
10.16.0.2 for the domU's network configuration.

   Hugo.

-- 
=== Hugo Mills: hugo@... carfax.org.uk | darksatanic.net | lug.org.uk ===
  PGP key: 1C335860 from wwwkeys.eu.pgp.net or http://www.carfax.org.uk
                      --- vi: The core of evil. ---

Attachment: signature.asc
Description: Digital signature

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users