[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Re: [Xen-devel] bt878 based dvr card vs. pci pass-thru



Hi All.

> This file should contain your device id, not slot address. Find out the
> numeric device id from 'lspci -n'.
It was clearly stated in the docs that I should have used the output of
'lspci -n' but somehow it supressed my attention. Sorry for wasting your
time on that.

On an other note, I've did what you and the manual suggested and here is
the result:

"""
Dec 18 10:47:43 hive kernel: pciback 0000:07:0e.0: enabling permissive
mode configuration space accesses!
Dec 18 10:47:43 hive kernel: pciback 0000:07:0e.0: permissive mode is
potentially unsafe!
Dec 18 10:47:43 hive kernel: pciback 0000:07:0e.1: enabling permissive
mode configuration space accesses!
Dec 18 10:47:43 hive kernel: pciback 0000:07:0e.1: permissive mode is
potentially unsafe!
Dec 18 10:47:43 hive kernel: pciback 0000:07:0f.0: enabling permissive
mode configuration space accesses!
Dec 18 10:47:43 hive kernel: pciback 0000:07:0f.0: permissive mode is
potentially unsafe!
Dec 18 10:47:43 hive kernel: pciback 0000:07:0f.1: enabling permissive
mode configuration space accesses!
Dec 18 10:47:43 hive kernel: pciback 0000:07:0f.1: permissive mode is
potentially unsafe!
Dec 18 10:47:43 hive kernel: pciback: vpci: 0000:07:0c.0: assign to
virtual slot 0
Dec 18 10:47:43 hive kernel: pciback: vpci: 0000:07:0c.1: assign to
virtual slot 0 func 1
Dec 18 10:47:43 hive kernel: pciback: vpci: 0000:07:0d.0: assign to
virtual slot 1
Dec 18 10:47:43 hive kernel: pciback: vpci: 0000:07:0d.1: assign to
virtual slot 1 func 1
Dec 18 10:47:43 hive kernel: pciback: vpci: 0000:07:0e.0: assign to
virtual slot 2
Dec 18 10:47:43 hive kernel: pciback: vpci: 0000:07:0e.1: assign to
virtual slot 2 func 1
Dec 18 10:47:43 hive kernel: pciback: vpci: 0000:07:0f.0: assign to
virtual slot 3
Dec 18 10:47:43 hive kernel: pciback: vpci: 0000:07:0f.1: assign to
virtual slot 3 func 1
Dec 18 10:47:43 hive kernel: device vif2.0 entered promiscuous mode
Dec 18 10:47:43 hive kernel: ADDRCONF(NETDEV_UP): vif2.0: link is not
ready
Dec 18 10:47:47 hive kernel: ADDRCONF(NETDEV_CHANGE): vif2.0: link
becomes ready
Dec 18 10:47:47 hive kernel: xenbr0: port 3(vif2.0) entering learning
state
Dec 18 10:47:47 hive kernel: xenbr0: topology change detected,
propagating
Dec 18 10:47:47 hive kernel: xenbr0: port 3(vif2.0) entering forwarding
state
Dec 18 10:47:55 hive kernel: PCI: Enabling device 0000:07:0c.0 (0000 ->
0002)
Dec 18 10:47:55 hive kernel: ACPI: PCI Interrupt 0000:07:0c.0[A] -> GSI
16 (level, low) -> IRQ 16
Dec 18 10:47:55 hive kernel: PCI: Enabling device 0000:07:0d.0 (0000 ->
0002)
Dec 18 10:47:55 hive kernel: ACPI: PCI Interrupt 0000:07:0d.0[A] -> GSI
17 (level, low) -> IRQ 20
Dec 18 10:47:57 hive kernel:  [__report_bad_irq+36/128] __report_bad_irq
+0x24/0x80
Dec 18 10:47:57 hive kernel:  [note_interrupt+162/256] note_interrupt
+0xa2/0x100
Dec 18 10:47:57 hive kernel:  [__do_IRQ+233/256] __do_IRQ+0xe9/0x100
Dec 18 10:47:57 hive kernel:  [do_IRQ+55/112] do_IRQ+0x37/0x70
Dec 18 10:47:57 hive kernel:  [__do_IRQ+179/256] __do_IRQ+0xb3/0x100
Dec 18 10:47:57 hive kernel:  [evtchn_do_upcall+146/256]
evtchn_do_upcall+0x92/0x100
Dec 18 10:47:57 hive kernel:  [hypervisor_callback+61/72]
hypervisor_callback+0x3d/0x48
Dec 18 10:47:57 hive kernel:  [<cd8b5107>] uhci_irq+0x27/0x190
[uhci_hcd]
Dec 18 10:47:57 hive kernel:  [<cd8e03a4>] usb_hcd_irq+0x24/0x60
[usbcore]
Dec 18 10:47:57 hive kernel:  [handle_IRQ_event+89/160] handle_IRQ_event
+0x59/0xa0
Dec 18 10:47:57 hive kernel:  [__do_IRQ+138/256] __do_IRQ+0x8a/0x100
Dec 18 10:47:57 hive kernel:  [do_IRQ+55/112] do_IRQ+0x37/0x70
Dec 18 10:47:57 hive kernel:  [evtchn_do_upcall+146/256]
evtchn_do_upcall+0x92/0x100
Dec 18 10:47:57 hive kernel:  [hypervisor_callback+61/72]
hypervisor_callback+0x3d/0x48
Dec 18 10:47:57 hive kernel:  [safe_halt+32/80] safe_halt+0x20/0x50
Dec 18 10:47:57 hive kernel:  [start_hz_timer+18/32] start_hz_timer
+0x12/0x20
Dec 18 10:47:57 hive kernel:  [xen_idle+44/96] xen_idle+0x2c/0x60
Dec 18 10:47:57 hive kernel:  [cpu_idle+139/224] cpu_idle+0x8b/0xe0
Dec 18 10:47:57 hive kernel:  [start_kernel+427/496] start_kernel
+0x1ab/0x1f0
Dec 18 10:47:57 hive kernel:  [unknown_bootoption+0/480]
unknown_bootoption+0x0/0x1e0
"""

I needed to force my machine to reboot physically. Any suggestions are
very welcome.

(Ubuntu 6.10 - dom0 & domU - and Xen-3.0.3 binary install with Kodicom
4400R-like bt878 based DVR card)
Should you need more info on my setup, I'm happy to provide you with
that.

Frank



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.