[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Research -> do participate.....
Question: - you have Fedora Core 6 as dom0 then you have SuSE10 as domU and on top of this domU you want to install XP??? forget it! or - you have Fedora Core 6 as dom0 and you want XP as domU? where is then the relation to SuSE/Novell? but probably your BIOS doesn't support Virtualisation... search the entire BIOS for that ... specialy in that places you never think that it could be :-) Gerhard xen-users-bounces@xxxxxxxxxxxxxxxxxxx wrote on 22.12.2006 11:55:19: > > This is what i read about SuSE/Novell that they are planning to support > windows DomU sometime late quarter next yr. Which forced me to start this > thread. So after going through all the responce that i got in this thread, > there is no doubt left . Windows OS can be installed over XEN. > I am having Fedora core 6 as a host and XEN 3.0.3 and after a lot of tries i > was able to install SuSE 10 on top of XEN and that too i have to start using > command in terminal. It doesnt start when i do it from VMM. > Anyway , when i tried to install windows OS on top of it, immediately after > setup completes VM disappear and then i cant even open it using command > line. Only blank screen appears. > I choosed FC6 and XEN 3.0.3 because XEN was included in the installation of > FC6 and i dont have interent for that system to install it after host OS > installation. > May be there is some problem with this version. > And about my processor..yeh it is fully virtualized intel VT PRO....as > follows > > [root@localhost ~]# cat /proc/cpuinfo > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 15 > model name : Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz > stepping : 6 > cpu MHz : 2128.098 > cache size : 2048 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 > clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni > monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm > bogomips : 5322.02 > > processor : 1 > vendor_id : GenuineIntel > cpu family : 6 > model : 15 > model name : Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz > stepping : 6 > cpu MHz : 2128.098 > cache size : 2048 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 > clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc up pni > monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm > bogomips : 5322.02 > > And memory info as follows.... > In total RAM is 1024MB but when i terminal shows like this after DOM0 starts > up > > [root@localhost ~]# cat /proc/meminfo > MemTotal: 398720 kB > MemFree: 11692 kB > Buffers: 14064 kB > Cached: 191996 kB > SwapCached: 0 kB > Active: 128492 kB > Inactive: 158788 kB > HighTotal: 0 kB > HighFree: 0 kB > LowTotal: 398720 kB > LowFree: 11692 kB > SwapTotal: 2097144 kB > SwapFree: 2097144 kB > Dirty: 8 kB > Writeback: 0 kB > AnonPages: 81264 kB > Mapped: 35828 kB > Slab: 18400 kB > PageTables: 5564 kB > NFS_Unstable: 0 kB > Bounce: 0 kB > CommitLimit: 2296504 kB > Committed_AS: 368468 kB > VmallocTotal: 450552 kB > VmallocUsed: 6524 kB > VmallocChunk: 443508 kB > > AND WHEN I START DOMU SuSE 10 as guest on top of it memory info is like > this.... > > [root@localhost ~]# xm create /etc/xen/linux_test > Using config file "/etc/xen/linux_test". > Started domain linux_test > > [root@localhost ~]# cat /proc/meminfo > MemTotal: 398720 kB > MemFree: 3452 kB > Buffers: 15288 kB > Cached: 179664 kB > SwapCached: 0 kB > Active: 148100 kB > Inactive: 146272 kB > HighTotal: 0 kB > HighFree: 0 kB > LowTotal: 398720 kB > LowFree: 3452 kB > SwapTotal: 2097144 kB > SwapFree: 2097144 kB > Dirty: 92 kB > Writeback: 0 kB > AnonPages: 99472 kB > Mapped: 38416 kB > Slab: 18184 kB > PageTables: 6824 kB > NFS_Unstable: 0 kB > Bounce: 0 kB > CommitLimit: 2296504 kB > Committed_AS: 418320 kB > VmallocTotal: 450552 kB > VmallocUsed: 6640 kB > VmallocChunk: 443508 kB > > I dont think its because of memory as i try with one VM at a time ...so SuSE > was successful but not windows . > > Now what do you guys say about my system hardware and all....is it allright > to have win xp on top of xen or not. > If there is no problem with the processor then i might try this time with > some different host and xen version. > Is there any other version of linux which incude XEN with its installation. > This time i wanna try with that OS which is already been tested. > If there is no other OS which include XEN then is there any other way to > have XEN if you dont have internet connection like by copying xen on cd or > something..... > If not then i might arrange internet for that sys.... > I desperately need that win xp on top of xen.....So do help me out by > sharing your knowledge friends... > Thanks a lot to all of you for replying.... > Tschuess.. > > > -- > View this message in context: http://www.nabble.com/Research--%3E- > do-participate.....-tf2865994.html#a8021952 > Sent from the Xen - User mailing list archive at Nabble.com. > > > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |