[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] Win Xp 64 bit install



> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of 
> Abhishek Gaurav
> Sent: 28 February 2007 22:46
> To: Xen-users@xxxxxxxxxxxxxxxxxxx; fedora-xen@xxxxxxxxxx
> Subject: [Xen-users] Win Xp 64 bit install
> 
> Hi,
> I am trying to install windows xp 64 bit (trial version) using 
> virt-install on a fc6 system. The installation seems to stall 
> when the 
> message in the vnc console says "Setup is starting windows".
> 
> The xm dmesg shows:
> 
> (XEN) (GUEST: 13) Booting from CD-Rom...
> (XEN) (GUEST: 13) unsupported PCI BIOS function 0x0E
> (XEN) (GUEST: 13) int13_harddisk: function 15, unmapped 
> device for ELDL=81
> (XEN) (GUEST: 13) *** int 15h function AX=E980, BX=00F2 not 
> yet supported!
> (XEN) (GUEST: 13) *** int 15h function AX=EC00, BX=0002 not 
> yet supported!
> (XEN) Trying to set reserved bit in EFER: 4d01

What version of Xen is this? ("xm info" should give version number at
least). 

Setting FFXSR (0x4000) is probably not "permitted", which also gives me
the indication that this is a AMD platform. Although, I guess setting
that bit shouldn't actually cause a problem as such. 

It's much more likely that the problem is that you're using pre-3.0.4
version of Xen. Try 3.0.4-1. 

> 
> The last message "Trying to set ... " actually comes up just 
> before it 
> stalls.
> 
> What might be causing this ?
> 
> I have also tried to install an older Win Xp home sp1, which actually 
> goes past the above messages (without "trying to set ...") 
> but ends up 
> in the famous black screen upon first reboot.


Probably same problem as above, try later version of Xen. The error
message about setting FFXSR isn't going to happen on a 32-bit Widnows,
as the 32-bit version of Windows doesn't use FXSAVE/FXRESTORE in kernel
mode anyways (unless the code specifically asks - but that's relatively
rare, so the saving by doing the "fast" version is minimal). 

--
Mats
> 
> It'll be great to know what might be causing the above problems.
> 
> Thanks,
> Abhishek.
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 
> 
> 



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.