RE: [Xen-users] Interface Order

["Kris Doosje" <k.doosje@xxxxxxx>]

I have the following in my config:

vif = [ 'mac=00:16:3e:00:00:00, bridge=xenbr0',
        'mac=00:16:3e:00:00:01, bridge=xenbr1' ]

I have no IP-config in the xen-config file, I do that in the guest itself.

In xend-config.sxp I have: (network-script network-custom-bridge)

And my network-custom-bridge script looks like this:

#!/bin/bash
dir=$(dirname "$0")
"$dir/network-bridge" "$@" vifnum=0 netdev=eth0 bridge=xenbr0
"$dir/network-bridge" "$@" vifnum=1 netdev=eth1 bridge=xenbr1

This works fine for me.

Good luck,

Kris


-----Oorspronkelijk bericht-----
Van: Wolfgang Hennerbichler [mailto:wogri@xxxxxxxxx]
Verzonden: donderdag 22 maart 2007 9:19
Aan: xen-users@xxxxxxxxxxxxxxxxxxx
Onderwerp: [Xen-users] Interface Order


Hi Xen folks,

I have a question where I couldn't find the answer on google or in  
the archives...
I have a statically compiled xenU kernel, and I want a XEN guest with  
2 network interfaces. My config looks like this:

name = "myname"
kernel = "/boot/vmlinuz-2.6-xenU"
memory = 256
vif = [ 'bridge=br701', 'bridge=br9' ]
disk = [ 'phy:vg0/myname,hda1,w','phy:vg0/myname_swap,hda2,w' ]
ip="1.2.3.4"
netmask="255.255.255.0"
root = "/dev/hda1 ro"
extra = "2"

Unfortunately the interface order in the (Linux)-Guest seems to be  
random. This means after booting the guest the IP 1.2.3.4 is assigned  
to either br701 or br9, but it's always random (both interfaces work  
in the guest though). If I define mac-addressses for the interfaces  
there is no difference. Can I somehow "lock" those interfaces? I  
don't know how. I'd appreciate your help!

wogri

-- 
wogri@xxxxxxxxx
http://www.wogri.com
http://www.einradfilm.at


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users