[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Fwd: [Xen-users] mythbackend dvb cards...need some guidance...
- To: xen-users@xxxxxxxxxxxxxxxxxxx
- From: "Tom Bishop" <bishoptf@xxxxxxxxx>
- Date: Mon, 26 Mar 2007 08:30:27 -0500
- Delivery-date: Mon, 26 Mar 2007 06:29:39 -0700
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:references; b=VQaG1hYGg8mnB8WBliJI+4hReqS4SYTiXEzwc8MkySi/m+HqTPNNFe+i1jsnMYPaK+xpw3maDS284WDX0xvVaZw8EQJozYGYLNOOIoVAaTU4Ovf2tOjx+FKGGfz+AUIii7QWPdS4Zxqt6gBqE7OYcfKB97hjTe2hmf3XFd04vr8=
- List-id: Xen user discussion <xen-users.lists.xensource.com>
1) The obvious question, does /dev/dvb/adapter0/frontend0 exist on your
filesystem? (I recently worked on a myth system that make
/dev/dvb0.frontend0 nodes, not the ones the software was expecting) If
not, run MAKEDEV dvb and try again... (if that works look into udev magic
to make it happen next time)
/dev/dvb/adapter0/frontend0 does exist with the correct permissions.
2) Have you check dmesg/syslog to see if the driver is being loaded in
domU and what (if any) error messages there are?
The only indication that I have is the error message when scanning, everything else looks good.
On 3/25/07,
Jac Kersing <
j.kersing@xxxxxxxxxxx> wrote:
On Sun, 25 Mar 2007, Tom Bishop wrote:
> scandvb /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB
> scanning /usr/share/dvb-apps/atsc/us-ATSC-center-frequencies-8VSB
> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
> main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such
> file or directory
1) The obvious question, does /dev/dvb/adapter0/frontend0 exist on your
filesystem? (I recently worked on a myth system that make
/dev/dvb0.frontend0 nodes, not the ones the software was expecting) If
not, run MAKEDEV dvb and try again... (if that works look into udev magic
to make it happen next time)
2) Have you check dmesg/syslog to see if the driver is being loaded in
domU and what (if any) error messages there are?
Regards,
Jac
---
Jac Kersing Technical Consultant The-Box Development
j.kersing@xxxxxxxxxxx
CISSP http://www.the-box.com
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
