[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] eth0 / device problem in dom0


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: phcolaris <phcolaris@xxxxxxxxxxx>
  • Date: Tue, 27 Mar 2007 10:18:12 +0100
  • Delivery-date: Tue, 27 Mar 2007 02:16:52 -0700
  • Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.co.uk; h=Received:X-YMail-OSG:Subject:From:To:Content-Type:Date:Message-Id:Mime-Version:X-Mailer:Content-Transfer-Encoding; b=00z4dJHzQl252WabotZjhwxQt0+NAp4+FofGS5lhEDcV9DAk7uCslz4KL0jnUjO4a0ISvGEiqjSFmlJR5HUrHHN57N4jgA3dz1puSPOKVrc1PNjVIF/CaBJmJMq8Vm+MOGL763ZErBdsjOF2y/9pI0h/LmhKRSZMfxFk1tYbzgA= ;
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

hi all,

I've got the stable xen 3.0.4-1 with the 2.6.16.33 kernel
complied without problems, but in boot I can see this and it doesn't
bring up the eth0

so I guess I'm missing something in the kernel? the e1000 driver is the
one I need for the network card.

thanks for any hint

rgds
phil


Start Unicode mode
done
Loading console font lat9w-16.psfu  -m trivial G0:loadable
done
BLKTAPCTRL[3859]: blktapctrl: v1.0.0

BLKTAPCTRL[3859]: Found driver: [raw image (aio)]

BLKTAPCTRL[3859]: Found driver: [raw image (sync)]

BLKTAPCTRL[3859]: Found driver: [vmware image (vmdk)]

BLKTAPCTRL[3859]: Found driver: [ramdisk image (ram)]

BLKTAPCTRL[3859]: Found driver: [qcow disk (qcow)]

BLKTAPCTRL[3859]: /dev/xen/blktap0 device already exists

device vif0.0 entered promiscuous mode
xenbr0: port 1(vif0.0) entering learning state
xenbr0: topology change detected, propagating
xenbr0: port 1(vif0.0) entering forwarding state
e1000: peth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
device peth0 entered promiscuous mode
xenbr0: port 2(peth0) entering learning state
xenbr0: topology change detected, propagating
xenbr0: port 2(peth0) entering forwarding state
Setting up network interfaces:
    lo        
    lo        IP address: 127.0.0.1/8
done
    eth0      
              No configuration found for eth0
unused
    veth0     
              No configuration found for veth0
unused
    veth1     
              No configuration found for veth1
unused
    veth2     
              No configuration found for veth2
unused
    veth3     
              No configuration found for veth3
unused
    vif0.0    
              No configuration found for vif0.0
unused
    vif0.1    
              No configuration found for vif0.1
unused
    vif0.2    
              No configuration found for vif0.2
unused
    vif0.3    
              No configuration found for vif0.3
unused
Waiting for mandatory devices:  eth-bus-pci-0000:00:04.0 __NSC__
18 17 16 15 14 13 12 11 10 9 8 6 5 4 3 2 1 0 
    peth0     
              No configuration found for peth0
failed
    peth0     interface could not be set up until now
failed
Setting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .
failed


                
___________________________________________________________ 
All New Yahoo! Mail ? Tired of Vi@gr@! come-ons? Let our SpamGuard protect you. 
http://uk.docs.yahoo.com/nowyoucan.html


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.