[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Need help setting up guest's networking


  • To: YEVGENIY GOLDBERG <thegoldberg@xxxxxxx>
  • From: Nico Kadel-Garcia <nkadel@xxxxxxxxx>
  • Date: Sun, 29 Apr 2007 08:27:11 +0100
  • Cc: xen-users@xxxxxxxxxxxxxxxxxxx
  • Delivery-date: Sun, 29 Apr 2007 00:24:00 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:user-agent:mime-version:to:cc:subject:references:in-reply-to:content-type:content-transfer-encoding; b=paZWmk2ntDJnKzgLSZQ5sAujgODeqPyiXsCjib3O1ev90E5FelCKsHPyL3vgx1WFadvXwiHHrHeqvJcvbVk7SQV+RSyacixK1LaI2EvkfncOgAxW9ibPC2whwHpH4d6LPZYXKJT6riPIXeOglObdw8qRhjtORmmruS+JbYcq+4o=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

YEVGENIY GOLDBERG wrote:
Greetings!

I finally got the install done for a couple of gust OSs (Win 2003 server & Suse 
Enterprise 10)
Bothe gusts are up and running, but - no networking.

My setup:

Hardware - AMD Athlon 4200+, ABIT Motherboard, 4 GB of DDR2 RAM, 2 onboard GB 
NICs
Host OS- Suse Linux Enterprise server 10
Xen - 3.0.2_09749-0.4

Config file for Win 2003 server guest:

#  -*- mode: python; -*-
#============================================================================
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is created using 'xm 
create'.
# You use a separate script for each domain you want to create, or
# you can set the parameters for the domain on the xm command line.
#============================================================================

import os, re
arch = os.uname()[4]
if re.search('64', arch):
    arch_libdir = 'lib64'
else:
    arch_libdir = 'lib'

#----------------------------------------------------------------------------
# Kernel image file.
kernel = "/usr/lib/xen/boot/hvmloader"

# The domain build function. HVM domain uses 'hvm'.
builder='hvm'

# Initial memory allocation (in megabytes) for the new domain.
#
# WARNING: Creating a domain with insufficient memory may cause out of
#          memory errors. The domain needs enough memory to boot kernel
#          and modules. Allocating less than 32MBs is not recommended.
memory = 512

# Shadow pagetable memory for the domain, in MB.
# Should be at least 2KB per MB of domain memory, plus a few MB per vcpu.
shadow_memory = 8

# A name for your domain. All domains must have different names.
name = "win2003server"

# 128-bit UUID for the domain.  The default behavior is to generate a new UUID
# on each call to 'xm create'.
#uuid = "06ed00fe-1162-4fc4-b5d8-11993ee4a8b9"

#-----------------------------------------------------------------------------
# the number of cpus guest platform has, default=1
#vcpus=1

# enable/disable HVM guest PAE, default=0 (disabled)
#pae=0

# enable/disable HVM guest ACPI, default=0 (disabled)
#acpi=0

# enable/disable HVM guest APIC, default=0 (disabled)
#apic=0

# List of which CPUS this domain is allowed to use, default Xen picks
#cpus = ""         # leave to Xen to pick
#cpus = "0"        # all vcpus run on CPU0
#cpus = "0-3,5,^1" # run on cpus 0,2,3,5

# Optionally define mac and/or bridge for the network interfaces.
# Random MACs are assigned if not given.
vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0' ]
# type=ioemu specify the NIC is an ioemu device not netfront
#vif = [ 'type=ioemu, bridge=xenbr0' ]

#----------------------------------------------------------------------------
# Define the disk devices you want the domain to have access to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain will see,
# and MODE is r for read-only, w for read-write.

#disk = [ 'phy:hda1,hda1,r' ]
disk = [ 'file:/var/lib/xen/images/windisk.img,ioemu:hda,w', 
'phy:/dev/hda,hdb,r' ]
cdrom="/media/disk/iso/win2003server.iso"

#----------------------------------------------------------------------------
# Configure the behaviour when a domain exits.  There are three 'reasons'
# for a domain to stop: poweroff, reboot, and crash.  For each of these you
# may specify:
#
#   "destroy",        meaning that the domain is cleaned up as normal;
#   "restart",        meaning that a new domain is started in place of the old
#                     one;
#   "preserve",       meaning that no clean-up is done until the domain is
#                     manually destroyed (using xm destroy, for example); or
#   "rename-restart", meaning that the old domain is not cleaned up, but is
#                     renamed and a new domain started in its place.
#
# The default is
#
on_poweroff = 'destroy'
on_reboot   = 'destroy'
on_crash    = 'destroy'
#
# For backwards compatibility we also support the deprecated option restart
#
# restart = 'onreboot' means on_poweroff = 'destroy'
#                            on_reboot   = 'restart'
#                            on_crash    = 'destroy'
#
# restart = 'always'   means on_poweroff = 'restart'
#                            on_reboot   = 'restart'
#                            on_crash    = 'restart'
#
# restart = 'never'    means on_poweroff = 'destroy'
#                            on_reboot   = 'destroy'
#                            on_crash    = 'destroy'

#on_poweroff = 'destroy'
#on_reboot   = 'restart'
#on_crash    = 'restart'

#============================================================================

# New stuff
device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'

#-----------------------------------------------------------------------------
# boot on floppy (a), hard disk (c) or CD-ROM (d)
# default: hard disk, cd-rom, floppy
boot="c"

#-----------------------------------------------------------------------------
#  write to temporary files instead of disk image files
#snapshot=1

#----------------------------------------------------------------------------
# enable SDL library for graphics, default = 0
sdl=1

#----------------------------------------------------------------------------
# enable VNC library for graphics, default = 1
vnc=0

#----------------------------------------------------------------------------
# address that should be listened on for the VNC server if vnc is set.
# default is to use 'vnc-listen' setting from /etc/xen/xend-config.sxp
#vnclisten="127.0.0.1"

#----------------------------------------------------------------------------
# set VNC display number, default = domid
#vncdisplay=1

#----------------------------------------------------------------------------
# try to find an unused port for the VNC server, default = 1
#vncunused=1

#----------------------------------------------------------------------------
# enable spawning vncviewer for domain's console
# (only valid when vnc=1), default = 0
#vncconsole=0
vncviewer=0

#----------------------------------------------------------------------------
# no graphics, use serial port
#nographic=0

#----------------------------------------------------------------------------
# enable stdvga, default = 0 (use cirrus logic device model)
stdvga=0

#-----------------------------------------------------------------------------
#   serial port re-direct to pty deivce, /dev/pts/n
#   then xm console or minicom can connect
serial='pty'


#-----------------------------------------------------------------------------
#   enable sound card support, [sb16|es1370|all|..,..], default none
#soundhw='sb16'


#-----------------------------------------------------------------------------
#    set the real time clock to local time [default=0 i.e. set to utc]
#localtime=1


#-----------------------------------------------------------------------------
#    start in full screen
#full-screen=1


#-----------------------------------------------------------------------------
#   Enable USB support (specific devices specified at runtime through the
#                       monitor window)
#usb=1

#   Enable USB mouse support (only enable one of the following, `mouse' for
#                             PS/2 protocol relative mouse, `tablet' for
#                             absolute mouse)
#usbdevice='mouse'
#usbdevice='tablet'



Config file for Suse Linux Enterprise 10 guest:

disk = [ 'file:/var/lib/xen/images/OraDb1/hda,hda,w', 'phy:/dev/hda,hdb,r' ]
memory = 1024
vcpus = 2
builder = 'linux'
name = 'OraDb1'
vif = [ 'mac=00:16:3e:f3:64:e9','bridge=xenbr0']
localtime = 0
on_poweroff = 'destroy'
on_reboot = 'restart'
on_crash = 'restart'
extra = ' TERM=xterm'
bootloader = '/usr/lib/xen/boot/domUloader.py'
bootentry = 'hda2:/boot/vmlinuz-xen,/boot/initrd-xen'
boot="c"



out put of brctl show:

bridge name     bridge id               STP enabled     interfaces
xenbr0          8000.feae66791813       no              vif0.0
                                                        peth0
                                                        vif2.1
                                                        vif2.0
                                                        tun0
                                                        vif3.0


Output of ifconfig on the host:


eth0      Link encap:Ethernet  HWaddr 00:50:8D:94:71:4A
          inet addr:67.184.153.5  Bcast:255.255.255.255  Mask:255.255.248.0
          inet6 addr: fe80::250:8dff:fe94:714a/64 Scope:Link
          UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:172324 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1904 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:12503150 (11.9 Mb)  TX bytes:371462 (362.7 Kb)

eth1      Link encap:Ethernet  HWaddr 00:50:8D:94:71:4B
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:5 Base address:0xa000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:502 errors:0 dropped:0 overruns:0 frame:0
          TX packets:502 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:49132 (47.9 Kb)  TX bytes:49132 (47.9 Kb)

peth0     Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:172405 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1953 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:12507544 (11.9 Mb)  TX bytes:377357 (368.5 Kb)
          Interrupt:11 Base address:0x4000

sit0      Link encap:IPv6-in-IPv4
          NOARP  MTU:1480  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

tun0      Link encap:Ethernet  HWaddr FE:AE:66:79:18:13
          inet6 addr: fe80::fcae:66ff:fe79:1813/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:31 errors:0 dropped:0 overruns:0 frame:0
          TX packets:843 errors:0 dropped:0 overruns:2 carrier:0
          collisions:0 txqueuelen:500
          RX bytes:4101 (4.0 Kb)  TX bytes:52246 (51.0 Kb)

veth1     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

veth2     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

veth3     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

veth4     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

veth5     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

veth6     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

veth7     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:1904 errors:0 dropped:0 overruns:0 frame:0
          TX packets:172324 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:371462 (362.7 Kb)  TX bytes:12503150 (11.9 Mb)

vif0.1    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.2    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.3    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.4    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.5    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.6    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif0.7    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif2.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:6 errors:0 dropped:0 overruns:0 frame:0
          TX packets:148584 errors:0 dropped:1800 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:468 (468.0 b)  TX bytes:9013081 (8.5 Mb)

vif2.1    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:150390 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif3.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:861 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

xenbr0    Link encap:Ethernet  HWaddr FE:AE:66:79:18:13
          inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:170009 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:7939155 (7.5 Mb)  TX bytes:0 (0.0 b)


I'll be happy to provide any other information to help identify the issue.
Couple of things: I myself find it helpful to hardcode the vifnames so that my SNMP reporting of bandwidth stays consistent. Second, iptables is not your friend for Xen: can you turn off the firewall on this machine for a few moments and see if you get your networking to your guest domains?

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.