[root@malban9 ~]# xm create -c /etc/xen/xmexample1 Using config file "/etc/xen/xmexample1". Started domain dom2 Bootdata ok (command line is root=/dev/sda2 ro) Linux version 2.6.18-8.el5xen (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:29:35 EST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000004800000 (usable) No mptable found. Built 1 zonelists. Total pages: 18432 Kernel command line: root=/dev/sda2 ro Initializing CPU#0 PID hash table entries: 512 (order: 9, 4096 bytes) Xen reported: 2166.816 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Software IO TLB disabled Memory: 54812k/73728k available (2321k kernel code, 10656k reserved, 1312k data, 168k init) Calibrating delay using timer specific routine.. 5418.75 BogoMIPS (lpj=10837509) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 (SMP-)alternatives turned off Brought up 1 CPUs checking if image is initramfs... it is Grant table initialized NET: Registered protocol family 16 ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 207A0 could not acquire Mutex [2] [20060707] Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 1, 8192 bytes) TCP established hash table entries: 4096 (order: 4, 65536 bytes) TCP bind hash table entries: 2048 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 2048) TCP reno registered IA-32 Microcode Update Driver: v1.14-xen audit: initializing netlink socket (disabled) audit(1163183681.782:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 6E92D7462CAE45D - key was been created 6655041 seconds in future - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Bootdata ok (command line is root=/dev/sda2 ro) Linux version 2.6.18-8.el5xen (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:29:35 EST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000004800000 (usable) No mptable found. Built 1 zonelists. Total pages: 18432 Kernel command line: root=/dev/sda2 ro Initializing CPU#0 PID hash table entries: 512 (order: 9, 4096 bytes) Xen reported: 2166.816 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Software IO TLB disabled Memory: 54812k/73728k available (2321k kernel code, 10656k reserved, 1312k data, 168k init) Calibrating delay using timer specific routine.. 5418.75 BogoMIPS (lpj=10837509) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 (SMP-)alternatives turned off Brought up 1 CPUs checking if image is initramfs... it is Grant table initialized NET: Registered protocol family 16 ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 207A0 could not acquire Mutex [2] [20060707] Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 1, 8192 bytes) TCP established hash table entries: 4096 (order: 4, 65536 bytes) TCP bind hash table entries: 2048 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 2048) TCP reno registered IA-32 Microcode Update Driver: v1.14-xen audit: initializing netlink socket (disabled) audit(1163183681.782:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 6E92D7462CAE45D - key was been created 6655041 seconds in future - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 XENBUS: Device with no driver: device/vbd/2050 XENBUS: Device with no driver: device/vif/0 Write protecting the kernel read-only data: 439k Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Loading xenblk.ko module Registering block device major 8 Loading xennet.ko module netfront: Initialising virtual ethernet driver. netfront: device eth0 has flipping receive path. Loading uhci-hcd.ko module USB Universal Host Controller Interface driver v3.0 Loading ohci-hcd.ko module Loading ehci-hcd.ko module Loading jbd.ko module Loading ext3.ko module Loading mptbase.ko module Fusion MPT base driver 3.04.02 Copyright (c) 1999-2005 LSI Logic Corporation Loading scsi_mod.ko module SCSI subsystem initialized Loading sd_mod.ko module register_blkdev: cannot get major 8 for sd Loading scsi_transport_sas.ko module Loading mptscsih.ko module Loading mptsas.ko module Fusion MPT SAS Host driver 3.04.02 Waiting for driver initialization. Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys exec of init (/sbin/init) failed!!!: No such file or directory Kernel panic - not syncing: Attempted to kill init!