[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] VNC to a vm


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: "sagnik dhar" <sagnik.dhar@xxxxxxxxx>
  • Date: Wed, 2 May 2007 08:56:23 +0530
  • Delivery-date: Tue, 01 May 2007 20:25:01 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:mime-version:content-type; b=fzXN7MxskamsKmNlYeWbjeADJRGgGCEzMBcpMLrRb/jl8uvtn07ntIvO5AsTcmjQspjdUTWDTM8DVpVRfB+/9vtOdW0+8lhz51PlSW6aT8e9QSkVPoFhPTyyiFcoddVlmVev3YOwcQrPyi1kQq4wHpWGNgLPWfA2/k3ouYIRVgM=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hello everybody,

I am quite new to Xen and im running Xen on Ubuntu Dapper. I want to VNC into a VM(domU) from a machine on the local LAN. I have assigned a dummy interface so that i can use that IP address as my VM's IP. The output of ifconfig is:

sagnik@sagnik-desktop:~$ ifconfig
dummy0    Link encap:Ethernet  HWaddr 7E:3A:16:C5:2E:91
          inet addr:192.168.3.1  Bcast:192.168.3.255   Mask:255.255.255.0
          inet6 addr: fe80::7c3a:16ff:fec5:2e91/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:210 (210.0 b)

eth0      Link encap:Ethernet  HWaddr 00:13:20:78:92:A0
          inet addr:192.168.1.100  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::213:20ff:fe78:92a0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1343 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1487 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1069413 (1.0 MiB)  TX bytes:351076 (342.8 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:5 errors:0 dropped:0 overruns:0 frame:0
          TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:272 (272.0 b)  TX bytes:272 (272.0 b)

But when i try to execute the command vncviewer and give this IP, i get an error message "tcp connection refused".

Am i going wrong in the method for assigning IPs itself ? If yes, please help me out.

Thanks for the help.

Regards,
Sagnik
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.