[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] wireless network not working on my dom0
Hello, Im failing to get my dom0 network to function properly, Im using a wireless card (eth1) along with my disabled network card (eth0). It looks like xen is configuring everything properly but im not able to ping even my router (10.0.0.2) Some important outputs bellow: lsmod Module Size Used by bridge 48148 0 lp 8452 0 nls_iso8859_15 4544 1 ntfs 99828 1 dm_mod 48120 2 bonding 81844 0 usblp 11392 0 eth1394 17220 0 usb_storage 32132 0 ipw2200 174380 0 ieee80211 28680 1 ipw2200 ieee80211_crypt 4800 1 ieee80211 ohci1394 31088 0 ieee1394 298168 2 eth1394,ohci1394 tg3 95812 0 i2c_i801 7692 0 parport_pc 22020 1 parport 20224 2 lp,parport_pc ehci_hcd 27272 0 i2c_core 16848 1 i2c_i801 uhci_hcd 30160 0 snd_intel8x0m 13900 0 ifconfig eth1 Link encap:Ethernet HWaddr 00:0E:35:87:C7:94 inet addr:10.0.0.14 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:93 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:8592 (8.3 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:166 errors:0 dropped:0 overruns:0 frame:0 TX packets:166 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15264 (14.9 KiB) TX bytes:15264 (14.9 KiB) peth1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF UP BROADCAST NOARP MTU:1500 Metric:1 RX packets:2110 errors:0 dropped:0 overruns:0 frame:0 TX packets:877 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:3214 (3.1 KiB) Interrupt:5 Base address:0x8000 Memory:e0210000-e0210fff vif0.1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:93 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8592 (8.3 KiB) TX bytes:0 (0.0 b) xenbr1 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF UP BROADCAST RUNNING NOARP MTU:1500 Metric:1 RX packets:93 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:7290 (7.1 KiB) TX bytes:0 (0.0 b) network-bridge status ============================================================ 5: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue link/ether 00:0e:35:87:c7:94 brd ff:ff:ff:ff:ff:ff inet 10.0.0.14/24 brd 10.0.0.255 scope global eth1 14: xenbr1: <BROADCAST,NOARP,UP> mtu 1500 qdisc noqueue link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff bridge name bridge id STP enabled interfaces xenbr1 8000.feffffffffff no vif0.1 peth1 10.0.0.0/24 dev eth1 proto kernel scope link src 10.0.0.14 default via 10.0.0.2 dev eth1 Kernel IP routing tableDestination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 10.0.0.2 0.0.0.0 UG 0 0 0 eth1 ============================================================ /etc/network/interfaces #wiless at home auto eth1 iface eth1 inet static wireless-key ********* address 10.0.0.14 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 gateway 10.0.0.2 Any help or guidance would be appreciated. _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |