Re: [Xen-users] Xen boot file

[James Wilson <jwilson@xxxxxxxxxxxxxxxxx>]

I think I see the problem I am using a kickstart file to install. Do i 
need to remove the VolGroup00 option?

bootloader --location=mbr --driveorder=xvda
clearpart --linux --drives=xvda --initlabel
part /boot --fstype ext3 --size=100 --ondisk=xvda
part pv.2 --size=0 --grow --ondisk=xvda
volgroup VolGroup00 --pesize=32768 pv.2
logvol swap --fstype swap --name=LogSwp00 --vgname=VolGroup00 --size=1984
logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=5024


Petersson, Mats wrote:
>  
>
>   
> > -----Original Message-----
> > From: James Wilson [mailto:jwilson@xxxxxxxxxxxxxxxxx] 
> > Sent: 12 June 2007 15:52
> > To: Petersson, Mats
> > Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: Re: [Xen-users] Xen boot file
> >
> > What do you mean by use the files within the GFS volume. Thats what I 
> > thought I was doing when I got the error. Am I going about it wrong?
> >     
> Sounds like it - but it may also be that virt-manager is doing something
> wrong in itself. Since I don't use virt-manager (or anything similar), I
> can't really say what you're doing wrong, if anything. 
>
> --
> Mats
>   
> > Petersson, Mats wrote:
> >     
> > >  
> > >
> > >   
> > >       
> > > > -----Original Message-----
> > > > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
> > > > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of 
> > > > James Wilson
> > > > Sent: 12 June 2007 15:38
> > > > To: xen-users@xxxxxxxxxxxxxxxxxxx
> > > > Subject: [Xen-users] Xen boot file
> > > >
> > > > Hey All,
> > > >
> > > >     I have created one big gfs volume approx. 136GB and I 
> > > > have exported 
> > > > it through gnbd and successfully imported it and mounted it. 
> > > > My idea is 
> > > > to install a bunch of xen instances to files on the mounted 
> > > > gfs volume. 
> > > > But everytime I go to install using virt-manager it give me 
> > > > this error. 
> > > > "Could not allocate requested partitions: Adding this 
> > > >         
> > partition would 
> >     
> > > > not leave enough disk space for already allocated logical 
> > > >         
> > volumes in 
> >     
> > > > VolGroup00.." Should I split the storage up before exporting it?
> > > >     
> > > >         
> > > I think you have two possible solutions: 
> > > 1. You use FILES within the GFS volume, which means that 
> > >       
> > the file would
> >     
> > > just be one of many files. 
> > > 2. You use individual (LVM) volumes for each guest, in 
> > >       
> > which case you
> >     
> > > need to split the it into (potentially many) logical volumes. 
> > >
> > > I suspect there are good and bad reasons for both, but I 
> > >       
> > don't think it
> >     
> > > makes much of a difference performance-wise whether you 
> > >       
> > have one large
> >     
> > > volume with many individual files or one volume per domain 
> > >       
> > - at least
> >     
> > > not if you don't have HUGE traffic to/from the GFS volume. 
> > >
> > > --
> > > Mats
> > >
> > >
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> > >
> > >   
> > >       
> >     
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>   
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users