[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] Make error



Just so you know, ive done that and still same problem :(

Thanks

Ian



-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Ian Tobin
Sent: 13 June 2007 10:36
To: Petersson, Mats; James Harper; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Make error

Really? Ill give that a blast then, I was about to give up lol :)

Thanks

Ian



-----Original Message-----
From: Petersson, Mats [mailto:Mats.Petersson@xxxxxxx] 
Sent: 13 June 2007 10:33
To: Ian Tobin; James Harper; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Make error

> -----Original Message-----
> From: Ian Tobin [mailto:itobin@xxxxxxxxxxxxx] 
> Sent: 13 June 2007 10:30
> To: Petersson, Mats; James Harper; xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] Make error
> 
> I think this is a big bug, ive have tried it on several 
> systems all with
> the same problem.

Yes, it's almost certainly some form of bug, but I think the real
problem is that we're doing "make mrproper" in the wrong place. I had
the same problem the other day (sorry, I should have posted about it,
but I didn't remember at the time), and I found that if you do "cd
build-linux-2.6.18-xen_x86_32; make mrproper; cd ..; make dist" it will
work. 

--
Mats
> 
> Ian
> 
> -----Original Message-----
> From: Petersson, Mats [mailto:Mats.Petersson@xxxxxxx] 
> Sent: 23 May 2007 14:06
> To: Ian Tobin; James Harper; xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] Make error
> 
> Try "make mrproper
> O=/usr/src/xen-3.1.0-src/build-linux-2.6.18-xen_x86_32" in 
> your "linux"
> directory. 
> 
> No guarantees, but I think that's what the problem is. 
> 
> --
> Mats 
> 
> > -----Original Message-----
> > From: Ian Tobin [mailto:itobin@xxxxxxxxxxxxx] 
> > Sent: 23 May 2007 13:14
> > To: Petersson, Mats; James Harper; xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: RE: [Xen-users] Make error
> > 
> > Hi,
> >  
> > getting another problem now.
> >  
> > I can now use menuconfig and select the bits to install.
> >  
> > I then issue command make which takes a while but completes.  
> > I then issue make install which also completes
> >  
> > I then 
> >  
> > cd../
> > ictsrv:/usr/src/xen-3.1.0-src
> > make install
> >  
> >  
> > goes quite a way through then brings up this error
> >  
> > if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod 
> > -ae -F System.map -b / -r 2.6.18-xen; fi
> > make[3]: Leaving directory 
> > `/usr/src/xen-3.1.0-src/build-linux-2.6.18-xen_x86_32'
> > make -C build-linux-2.6.18-xen_x86_32 ARCH=i386 
> INSTALL_PATH=/ vmlinuz
> > make[3]: Entering directory 
> > `/usr/src/xen-3.1.0-src/build-linux-2.6.18-xen_x86_32'
> > make -C /usr/src/xen-3.1.0-src/linux-2.6.18-xen 
> > O=/usr/src/xen-3.1.0-src/build-linux-2.6.18-xen_x86_32 vmlinuz
> >   Using /usr/src/xen-3.1.0-src/linux-2.6.18-xen as source for kernel
> >   /usr/src/xen-3.1.0-src/linux-2.6.18-xen is not clean, 
> > please run 'make mrproper'
> >   in the '/usr/src/xen-3.1.0-src/linux-2.6.18-xen' directory.
> > make[5]: *** [prepare3] Error 1
> > make[4]: *** [vmlinuz] Error 2
> > make[3]: *** [vmlinuz] Error 2
> > make[3]: Leaving directory 
> > `/usr/src/xen-3.1.0-src/build-linux-2.6.18-xen_x86_32'
> > make[2]: *** [build] Error 2
> > make[2]: Leaving directory `/usr/src/xen-3.1.0-src'
> > make[1]: *** [linux-2.6-xen-install] Error 2
> > make[1]: Leaving directory `/usr/src/xen-3.1.0-src'
> > make: *** [install-kernels] Error 1
> > ictsrv:/usr/src/xen-3.1.0-src# cd linux-2.6.18-xen
> > ictsrv:/usr/src/xen-3.1.0-src/linux-2.6.18-xen# make mrproper
> >   CLEAN   scripts/basic
> >   CLEAN   scripts/kconfig
> >   CLEAN   include/config
> >   CLEAN   .config
> > ictsrv:/usr/src/xen-3.1.0-src/linux-2.6.18-xen#
> >  
> > Ive tried everything i can think of
> >  
> > make clean
> > make clean install
> > make mrproper
> > deleted all 3.1 files out from /boot
> >  
> > even removed the whole source directory and  started again, 
> > still no joy.  Any ideas?
> >  
> > thanks
> >  
> > Ian
> >  
> > 
> > ________________________________
> > 
> > From: Petersson, Mats [mailto:Mats.Petersson@xxxxxxx]
> > Sent: Tue 22/05/2007 13:06
> > To: Ian Tobin; James Harper; xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: RE: [Xen-users] Make error
> > 
> > 
> > 
> > 
> > 
> > > -----Original Message-----
> > > From: Ian Tobin [mailto:itobin@xxxxxxxxxxxxx]
> > > Sent: 22 May 2007 13:01
> > > To: Petersson, Mats; James Harper; xen-users@xxxxxxxxxxxxxxxxxxx
> > > Subject: RE: [Xen-users] Make error
> > >
> > > yes your correct, it was set to PC-compatable, i have changed
> > > that to XEN and it is now compiling.
> > > 
> > > not sure how you figured that out but thanks :)
> > 
> > I just went through the "obvious" steps of "trying to build just the
> > kernel", which meant "make menuconfig" on a "clean" 
> > Linux-2.6.18, which
> > in turn meant that the config file isn't set up for Xen (I 
> > noticed that
> > it wasn't before I tested it, so I just guessed that was 
> the problem -
> > which I then proved by changing it and, as you say, it compiles).
> > 
> > The reason it fails is that the patches that Xen apply modifies some
> > things. In this case, a macro that would in native mode 
> > compile nicely,
> > but now turns into something that can't be used in 
> asm-offsets in Xen.
> > 
> > --
> > Mats
> > > 
> > >
> > > ________________________________
> > >
> > > From: Petersson, Mats [mailto:Mats.Petersson@xxxxxxx]
> > > Sent: Tue 22/05/2007 12:45
> > > To: James Harper; Ian Tobin; xen-users@xxxxxxxxxxxxxxxxxxx
> > > Subject: RE: [Xen-users] Make error
> > >
> > >
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: James Harper [mailto:james.harper@xxxxxxxxxxxxxxxx]
> > > > Sent: 22 May 2007 12:30
> > > > To: Petersson, Mats; Ian Tobin; xen-users@xxxxxxxxxxxxxxxxxxx
> > > > Subject: RE: [Xen-users] Make error
> > > >
> > > > > > -----Original Message-----
> > > > > > From: Ian Tobin [mailto:itobin@xxxxxxxxxxxxx]
> > > > > > Sent: 22 May 2007 12:00
> > > > > > To: Petersson, Mats; xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > Subject: RE: [Xen-users] Make error
> > > > > >
> > > > > > thanks Matts, just so you know this is  a Dell PE1750 
> > 2.4 Xeon.
> > > > >
> > > > > And that will make what difference? It should still build.
> > > > >
> > > >
> > > > It could make the world of difference... aren't there a few
> > > different
> > > > flavours that come under the i386 architecture? Certainly I
> > > > don't think
> > > > you'd reproduce a problem from arch/i386 on a powerpc or amd64.
> > >
> > > What MACHINE it is won't make much of a difference (afaik
> > > Linux doesn't
> > > have any logic to figure out what the hardware looks like 
> > much beyond
> > > figuring which model and mode of processor it is being 
> run on). The
> > > architecture being built for is a different matter.
> > >
> > > >
> > > > A copy of the .config is probably required to reproduce 
> > the problem
> > > > though... as well as the version of gcc etc in use.
> > >
> > > Possibly, but I've just repro'd the problem (although, as you say,
> > > x86_64 build doesn't have the same problem!)
> > >
> > > And I believe I know what the problem is too: The
> > > subarchitecture in the
> > > config isn't set to "Xen" but "PC-compatible".
> > >
> > > --
> > > Mats
> > > >
> > > > James
> > >
> > >
> > >
> > >
> > >
> > 
> > 
> > 
> > 
> > 
> 
> 
> 
> 
> 
> 




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.