|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [Xen-users] Xen and Windows
> Can you post the COMPLETE configuration file?
# -*- mode: python; -*-
#============================================================================
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is created using 'xm
create'.
# You use a separate script for each domain you want to create, or
# you can set the parameters for the domain on the xm command line.
#============================================================================
import os, re
arch = os.uname()[4]
if re.search('64', arch):
arch_libdir = 'lib64'
else:
arch_libdir = 'lib'
#----------------------------------------------------------------------------
# Kernel image file.
kernel = "/usr/lib/xen/boot/hvmloader"
# The domain build function. HVM domain uses 'hvm'.
builder='hvm'
# Initial memory allocation (in megabytes) for the new domain.
#
# WARNING: Creating a domain with insufficient memory may cause out of
# memory errors. The domain needs enough memory to boot kernel
# and modules. Allocating less than 32MBs is not recommended.
memory = 1024
# Shadow pagetable memory for the domain, in MB.
# Should be at least 2KB per MB of domain memory, plus a few MB per vcpu.
# shadow_memory = 8
# A name for your domain. All domains must have different names.
name = "qualitatif"
# 128-bit UUID for the domain. The default behavior is to generate a new
UUID
# on each call to 'xm create'.
#uuid = "06ed00fe-1162-4fc4-b5d8-11993ee4a8b9"
#-----------------------------------------------------------------------------
# The number of cpus guest platform has, default=1
#vcpus=1
# Enable/disable HVM guest PAE, default=1 (enabled)
#pae=1
# Enable/disable HVM guest ACPI, default=1 (enabled)
#acpi=1
#acpi=0
# Enable/disable HVM APIC mode, default=1 (enabled)
# Note that this option is ignored if vcpus > 1
#apic=1
#apic=1
# List of which CPUS this domain is allowed to use, default Xen picks
#cpus = "" # leave to Xen to pick
#cpus = "0" # all vcpus run on CPU0
#cpus = "0-3,5,^1" # run on cpus 0,2,3,5
# Optionally define mac and/or bridge for the network interfaces.
# Random MACs are assigned if not given.
#vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0, model=ne2k_pci' ]
# type=ioemu specify the NIC is an ioemu device not netfront
vif = [ 'type=ioemu, bridge=xenbr0' ]
#----------------------------------------------------------------------------
# Define the disk devices you want the domain to have access to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain will see,
# and MODE is r for read-only, w for read-write.
#disk = [ 'phy:hda1,hda1,r' ]
#disk = [ 'file:/var/images/min-el3-i386.img,hda,w', ',hdc:cdrom,r' ]
disk = [ 'phy:/dev/vg00/windows2003,ioemu:hda,w', ',hdc:cdrom,r' ]
#----------------------------------------------------------------------------
# Configure the behaviour when a domain exits. There are three 'reasons'
# for a domain to stop: poweroff, reboot, and crash. For each of these you
# may specify:
#
# "destroy", meaning that the domain is cleaned up as normal;
# "restart", meaning that a new domain is started in place of the
old
# one;
# "preserve", meaning that no clean-up is done until the domain is
# manually destroyed (using xm destroy, for example); or
# "rename-restart", meaning that the old domain is not cleaned up, but is
# renamed and a new domain started in its place.
#
# The default is
#
# on_poweroff = 'destroy'
# on_reboot = 'restart'
# on_crash = 'restart'
#
# For backwards compatibility we also support the deprecated option restart
#
# restart = 'onreboot' means on_poweroff = 'destroy'
# on_reboot = 'restart'
# on_crash = 'destroy'
#
# restart = 'always' means on_poweroff = 'restart'
# on_reboot = 'restart'
# on_crash = 'restart'
#
# restart = 'never' means on_poweroff = 'destroy'
# on_reboot = 'destroy'
# on_crash = 'destroy'
#on_poweroff = 'destroy'
#on_reboot = 'restart'
#on_crash = 'restart'
#============================================================================
# New stuff
device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'
#cdrom="/media/iso_images/windows_2003_standard.iso"
#cdrom="dev/cdrom"
#-----------------------------------------------------------------------------
# boot on floppy (a), hard disk (c), Network (n) or CD-ROM (d)
# default: hard disk, cd-rom, floppy
#boot="cda"
boot="d"
#-----------------------------------------------------------------------------
# write to temporary files instead of disk image files
#snapshot=1
#----------------------------------------------------------------------------
# enable SDL library for graphics, default = 0
sdl=1
#----------------------------------------------------------------------------
# enable VNC library for graphics, default = 1
vnc=0
#----------------------------------------------------------------------------
# address that should be listened on for the VNC server if vnc is set.
# default is to use 'vnc-listen' setting from /etc/xen/xend-config.sxp
#vnclisten="127.0.0.1"
#----------------------------------------------------------------------------
# set VNC display number, default = domid
#vncdisplay=1
#----------------------------------------------------------------------------
# try to find an unused port for the VNC server, default = 1
#vncunused=1
#----------------------------------------------------------------------------
# enable spawning vncviewer for domain's console
# (only valid when vnc=1), default = 0
#vncconsole=0
#----------------------------------------------------------------------------
# set password for domain's VNC console
# default is depents on vncpasswd in xend-config.sxp
vncpasswd=''
#----------------------------------------------------------------------------
# no graphics, use serial port
#nographic=0
#----------------------------------------------------------------------------
# enable stdvga, default = 0 (use cirrus logic device model)
stdvga=0
#-----------------------------------------------------------------------------
# serial port re-direct to pty deivce, /dev/pts/n
# then xm console or minicom can connect
serial='pty'
#-----------------------------------------------------------------------------
# Qemu Monitor, default is disable
# Use ctrl-alt-2 to connect
#monitor=1
#-----------------------------------------------------------------------------
# enable sound card support, [sb16|es1370|all|..,..], default none
#soundhw='sb16'
#-----------------------------------------------------------------------------
# set the real time clock to local time [default=0 i.e. set to utc]
#localtime=1
#-----------------------------------------------------------------------------
# set the real time clock offset in seconds [default=0 i.e. same as dom0]
#rtc_timeoffset=3600
#-----------------------------------------------------------------------------
# start in full screen
#full-screen=1
#-----------------------------------------------------------------------------
# Enable USB support (specific devices specified at runtime through the
# monitor window)
#usb=1
# Enable USB mouse support (only enable one of the following, `mouse' for
# PS/2 protocol relative mouse, `tablet' for
# absolute mouse)
#usbdevice='mouse'
#usbdevice='tablet'
#-----------------------------------------------------------------------------
# Set keyboard layout, default is en-us keyboard.
#keymap='ja'
>
> --
> Mats
>
>> -----Original Message-----
>> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
>> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Franck
>> Sent: 19 June 2007 13:50
>> To: xen-users@xxxxxxxxxxxxxxxxxxx
>> Subject: Re: [Xen-users] Xen and Windows
>>
>>
>> > Hi,
>> >
>> > xend work fine now :) YAHOO
>> >
>> > I'm trying to install Win2003 on xen 3.1 64Bits with this tutorial :
>> > http://www.xensource.com/files/xen_install_windows.pdf
>> >
>> > All is fine except at the end :(
>> > xm create /etc/xen/available/win2003.hvm
>> > Error: (22, 'Invalid argument')
>>
>> the problem is not with the windows config file because, i'm
>> testing with
>> debian installation and the result is the same : ERROR 22
>>
>> Perhaps with UUID ?
>>
>> Franck
>> --
>> http://www.linuxpourtous.com
>>
>>
>> _______________________________________________
>> Xen-users mailing list
>> Xen-users@xxxxxxxxxxxxxxxxxxx
>> http://lists.xensource.com/xen-users
>>
>>
>>
>
>
>
--
http://www.linuxpourtous.com
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |