|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] VM got stuck from the newly created SLC4 image
Hi, I am having trouble with my newly created SLC4 VM. It boots up but gets stuck while starting Starting HAL daemon: [ OK ]. Any help would be much appreciated! By the way, its being booted with Pygrub. Cheers Omer --- console output --- Linux version 2.6.9-55.0.2.EL.cernxenU (root@lxcert-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-8)) #1 SMP Wed Jun 27 13:57:15 CEST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000010000000 (usable) 0MB HIGHMEM available. 264MB LOWMEM available. Using x86 segment limits to approximate NX protection IRQ lockup detection disabled Built 1 zonelists Kernel command line: ip= 128.142.200.239:1.2.3.4:128.142.1.1:255.255.0.0:ctb-generic-17.cern.ch:eth0:off root=/dev/sda1 ro None Initializing CPU#0 CPU 0 irqstacks, hard=c0339000 soft=c0319000 PID hash table entries: 2048 (order: 11, 32768 bytes) Xen reported: 2790.702 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) vmalloc area: d1000000-f4ffe000, maxmem 2d800000 Memory: 253396k/270336k available (1451k kernel code, 8720k reserved, 542k data, 124k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 1518k freed Grant table initialized NET: Registered protocol family 16 Brought up 1 VCPUs xen_mem: Initialising balloon driver. audit: initializing netlink socket (disabled) audit(1183478688.522:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 2E127DB53460107E - User ID: Red Hat, Inc. (Kernel Module GPG key) rtc: IRQ 8 is not free. i8042.c: No controller found. RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Xen virtual console successfully installed as xvc0 Linux version 2.6.9-55.0.2.EL.cernxenU (root@lxcert-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-8)) #1 SMP Wed Jun 27 13:57:15 CEST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000010000000 (usable) 0MB HIGHMEM available. 264MB LOWMEM available. Using x86 segment limits to approximate NX protection IRQ lockup detection disabled Built 1 zonelists Kernel command line: ip= 128.142.200.239:1.2.3.4:128.142.1.1:255.255.0.0:ctb-generic-17.cern.ch:eth0:off root=/dev/sda1 ro None Initializing CPU#0 CPU 0 irqstacks, hard=c0339000 soft=c0319000 PID hash table entries: 2048 (order: 11, 32768 bytes) Xen reported: 2790.702 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) vmalloc area: d1000000-f4ffe000, maxmem 2d800000 Memory: 253396k/270336k available (1451k kernel code, 8720k reserved, 542k data, 124k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Brought up 1 CPUs checking if image is initramfs... it is Freeing initrd memory: 1518k freed Grant table initialized NET: Registered protocol family 16 Brought up 1 VCPUs xen_mem: Initialising balloon driver. audit: initializing netlink socket (disabled) audit(1183478688.522:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 2E127DB53460107E - User ID: Red Hat, Inc. (Kernel Module GPG key) rtc: IRQ 8 is not free. i8042.c: No controller found. RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Xen virtual console successfully installed as xvc0 Event-channel device installed. mice: PS/2 mouse device common for all mice md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 5, 196608 bytes) TCP: Hash tables configured (established 16384 bind 16384) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode XENBUS: Device with no driver: device/vbd/2049 XENBUS: Device with no driver: device/vbd/2050 XENBUS: Device with no driver: device/vif/0 Freeing unused kernel memory: 124k freed Red Hat nash version starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes mknod: failed to create /dev/ram0: File exists mknod: failed to create /dev/ram1: File exists Setting up hotplug. Creating block device nodes. Loading jbd.ko module Loading ext3.ko module Loading dm-mod.ko module device-mapper: 4.5.5-ioctl (2006-12-01) initialised: dm-devel@xxxxxxxxxx Loading dm-mirror.ko module Loading dm-zero.ko module Loading dm-snapshot.ko module Loading xenblk.ko module Registering block device major 8 Using cfq io scheduler Loading xennet.ko module netfront: Initialising virtual ethernet driver. netfront: device eth0 has flipping receive path. Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks INIT: version 2.85 booting Setting default font (latarcyrheb-sun16): [ OK ] Welcome to Scientific Linux CERN SLC Press 'I' to enter interactive startup. Starting udev: [ OK ] Initializing hardware... storage network audio done[ OK ] Configuring kernel parameters: [ OK ] Setting clock (utc): Tue Jul 3 18:04:56 CEST 2007 [ OK ] Setting hostname localhost: [ OK ] Checking root filesystem [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 /dev/sda1: clean, 20215/655360 files, 187084/1310720 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] no block devices found Setting up Logical Volume Management: [ OK ] Checking filesystems Checking all file systems. [ OK ] Mounting local filesystems: [ OK ] Enabling swap space: [ OK ] INIT: Entering runlevel: 3 Entering non-interactive startup No volume groups found Starting knconfig: [ OK ] Setting network parameters: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Mounting other filesystems: [ OK ] Starting system message bus: [ OK ] Starting HAL daemon: [ OK ] -- ---------------------------------------------------------- CERN – European Organization for Nuclear Research, IT Department, CH-1211 Geneva 23, Switzerland Phone: +41 (0) 22 767 2224 Fax: +41 (0) 22 766 8683 E-mail : Omer.Khalid@xxxxxxx Homepage: http://cern.ch/Omer.Khalid _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |