[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Re: bridging two interfaces

  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: "Tomoki Taniguchi" <tomoki.taniguchi@xxxxxxxxx>
  • Date: Tue, 31 Jul 2007 11:28:30 +0900
  • Delivery-date: Mon, 30 Jul 2007 19:26:14 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=hkSN6HOFOZ96MPtv20ixmaKmklnuN73hSrVwu67UDtfEGO9YITWG00/6eXDSUJLSimd0FRdrIPluFmX0GPUzJzPN9JnxdMO3/qsOYeBptmlpe8YUmRSonop4fw/wyDitwlOfBT2/foyjujjBxbapIs1xLgNpbxPojbzfkWLkWCk=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

just an update.
Now I am sure my xenbr1 is note being set properly
it is being bridged to eth0
I changed the domU's eth1 settings from
static to dhcp, and eth1 gets an ip from the LAN
which is connected to the eth0 on dom0.

so i guess my multi-network-bridge script is not working properly.

On 7/31/07, Tomoki Taniguchi <tomoki.taniguchi@xxxxxxxxx> wrote:
> I have a host machine with eth0 and eth1.
> eth0 is connected to the lan and eth1 is connected to the internet
> I am trying to bridge both interfaces in xend so that
> xenbr0=eth0 and xenbr1=eth1
> following some documentation i changed
> (network-script network-bridge)
> to
> (network-script multi-network-bridge)
> in /etc/xen/xend-config.sxp
> then i created a /etc/xen/scripts/multi-network-bridge file
> in put
> #!/bin/sh
> dir=$(dirname "$0")
> "$dir/network-bridge" "$@" vifnum=0 netdev=eth0
> "$dir/network-bridge" "$@" vifnum=1 netdev=eth1
> in side.
> I restart xend, which seemed to create the xenbr0 and xenbr1
> interfaces.
> I then editted the domU config file. I changed
> vif = [ 'bridge=xenbr0' ]
> to
> vif = [ 'bridge=xenbr0','bridge=xenbr1' ]
> eth0 and eth1 are created on domU and i was able to set the ip
> addresses for eth0 and eth1.
> i was able to connect to the domU host through the lan ip address
> assigned to eth0.
> but i can't seem to connect via the wan ip address assigned to eth1.
> from inside the domU i have tried to ping other machines on the same wan 
> subnet,
> but i get a "Destination Unreachable".  I have confirmed that the ip
> address and the subnet
> is correct.  I can't ping the domU eth1 ipaddress from the dom0 eth1
> ipaddress which is on the same subnet.
> which leads me to believe my xenbr1 is not being setup properly.
> can anyone help me with this?
> Tomoki

Tomoki Taniguchi
SKYPE: taiyocable.com_taniguchi_tomoki
MSN: tomoki_taniguchi@xxxxxxxxxxx
YAHOO: tomoki_taniguchi
AIM: tomoki taniguchi

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.