[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] AW: AW: [SPAM] [Xen-users] Xen networking problem
I remember that the driver I downloaded from broadcom created a bnx2.ko module that I then copied into the /lib/modules/2.6.18.xx/somewhere folder. Are you sure the vorrect Broadcom driver (not the kernel driver) is loaded? Hinrich -----Ursprüngliche Nachricht----- Von: Yongjun Jeon [mailto:yongjunj@xxxxxxxxxxxxxx] Gesendet: Monday, July 30, 2007 8:08 PM An: Hinrich Aue Cc: xen-users@xxxxxxxxxxxxxxxxxxx; Yongjun Jeon Betreff: Re: AW: [SPAM] [Xen-users] Xen networking problem Hi Hinrich, Thanks for your response. I am using a BroadCom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express (rev 02), and I am currently using the BroadCom driver. I've also tried the ethtool command you gave me, but it didn't work either. Rather, here's what I saw when I did ethtool on vif's: root@perodua:~# ethtool vif0.0 Settings for vif0.0: Link detected: yes root@perodua:~# ethtool vif2.0 Settings for vif2.0: Link detected: no root@perodua:~# So it seems that my HVM Windows XP guest is not "plugged in", hence no "RUNNING" flag on ifconfig; how should I go about fixing this? I'm even more confused now because the following post (http://lists.xensource.com/archives/html/xen-devel/2005-12/msg00017.html) suggests that a tg3 based machine (tg3 is the name of the BroadCom driver) works out of the box with no hassle. Any ideas? Any help is appreciated. Thx, Jun On Mon, 30 Jul 2007, Hinrich Aue wrote: > When you use broadcom network cards, try the Broadcom drivers instead of the > linux kernel driver. > > http://www.broadcom.com/docs/driver_download/NXII/linux-1.5.10c.zip > > When you have other network cards, look at this: > > http://lists.xensource.com/archives/html/xen-users/2006-05/msg00817.html > > or so. You have to make ethtool -K nicX tx off > while nicX is your network adapter or bridge. > > Google for that a little more. You can adjust you scripts to do that > automatically on startup. > > Hinrich > > > -----Ursprüngliche Nachricht----- > Von: xen-users-bounces@xxxxxxxxxxxxxxxxxxx > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] Im Auftrag von Yongjun Jeon > Gesendet: Monday, July 30, 2007 6:31 PM > An: xen-users@xxxxxxxxxxxxxxxxxxx > Cc: Yongjun Jeon > Betreff: [SPAM] [Xen-users] Xen networking problem > > Hi, > > I've been googling around for several days now, but with no luck. I'm hoping > > someone here might be able to help me out... > > I've installed and run Xen 3.0.4 (I need this specific version) with no > problem, and the guests run smoothly; the only problem is that I have never > been able to get the guests to ping the host (Dom0), or vice versa. I cannot > > access the internet from the guests, but it works fine on Dom0. > > I have only one NIC on Dom0 (eth0) that connects to the internet. Right now > I'm > just trying to get the guests and Dom0 to recognize each other, let alone > guests' internet access. > > I've tried network-bridge, network-nat, network-route, and even some custom > scripts such as network-private > (http://lists.xensource.com/archives/html/xen-users/2006-09/msg00925.html) > and > network-virtual (http://en.opensuse.org/Xen3_and_a_Virtual_Network), with no > > success. I've tried all I could, but here's one thing I believe is the > problem. > When I run ifconfig on Dom0, I see this on the guest's vif: > > vif2.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF > UP BROADCAST NOARP MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:32 > RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > > As you can see, I don't see a "RUNNING" flag on guests' vifs. > Can anyone please help me out? I'm completely lost here. > > If it helps, I'm running Ubuntu 7.04, and I'm experimenting with an HVM > guest (Windows XP). > > Thx, > Jun > > > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users > > > _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |