[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] xen + suse

  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: "shuki k" <shukix@xxxxxxxxx>
  • Date: Thu, 1 Nov 2007 17:55:18 +0200
  • Delivery-date: Thu, 01 Nov 2007 09:02:50 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:mime-version:content-type; b=tC4iZToyXTFB8BjIxb/Cf+P1hCXORv5XPFdirbxviLNULROQsXTmLdTZenKxRWLHB2sxfyvxCVh7R6cmYfrPHdAaYaobTwCofpv5d3w7E9S2xPUR2l18kwSjyWuAPZQFLNZFiaqBcsPEeyfhfUeerh0U+5G3ovrkewkN6s8uZv0=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

I am running:
haifa-suse:~ # uname -a
Linux haifa-suse #1 SMP Mon Feb 19 14:25:39 UTC 2007 i686 i686 i386 GNU/Linux
haifa-suse:~ #
 & I try to boot the following VM configuration:
 cat /tmp/x1
ipaddr = ""

kernel = "/boot/vmlinuz-xen"
ramdisk = "/boot/initrd-"
#extra="TERM=xterm "
disk=[ 'file:/vm1disk,xvda1,w' ]
vif=[ 'mac=00:09:b7:da:5f:e1,bridge=xenbr0' ]
root="/dev/xvda1 ro"
extra = "ignorebiostables max_loop=32 noirqbalance fastboot nousb selinux=0 ide=nodma apm=off acpi=off xencons=tty128 console=tty128"
As you can see below it just hang:
haifa-suse:/ # xm create -c /tmp/x1
Using config file "/tmp/x1".
Started domain x1
Linux version (geeko@buildhost) (gcc version 4.1.2 20070115 (prerelease) (SUSE Linux)) #1 SMP Mon Feb 19 14:25:39 UTC 2007
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000008800000 (usable)
0MB HIGHMEM available.
136MB LOWMEM available.
ACPI in unprivileged domain disabled
Allocating PCI resources starting at 10000000 (gap: 08800000:f7800000)
Built 1 zonelists
Kernel command line: root=/dev/xvda1 ro ignorebiostables max_loop=32 noirqbalance fastboot nousb selinux=0 ide=nodma apm=off acpi=off xencons=tty128 console=tty128
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Xen reported: 1396.434 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Software IO TLB disabled
vmalloc area: c9000000-fb7fe000, maxmem 33ffe000
Memory: 118652k/139264k available (1977k kernel code, 12280k reserved, 674k data, 188k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3493.16 BogoMIPS (lpj=6986321)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 6376k freed
Brought up 1 CPUs
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Subsystem revision 20060127
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
Setting mem allocation to 131072 kiB
PCI: System does not support PCI
PCI: System does not support PCI
audit: initializing netlink socket (disabled)
audit(1193933070.252:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
rtc: IRQ 8 is not free.
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
Failed to obtain physical IRQ 6
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
Xen virtual console successfully installed as tty128
Event-channel device installed.
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/51713
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/console/0
Freeing unused kernel memory: 188k freed
netfront: Initialising virtual ethernet driver.
netfront: device eth0 has copying receive path.
Registering block device major 202
blkfront: xvda1: barriers enabled
ReiserFS: xvda1: found reiserfs format " 3.6" with standard journal
ReiserFS: xvda1: using ordered data mode
reiserfs: using flush barriers
ReiserFS: xvda1: journal params: device xvda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: xvda1: checking transaction log (xvda1)
ReiserFS: xvda1: Using r5 hash to sort names
reiserfs: enabling write barrier flush mode
eth0 renamed to eth8
device-mapper: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
loop: loaded (max 64 devices)
haifa-suse:~ # xm list
Name                                      ID   Mem VCPUs      State   Time(s)
Domain-0                                   0   874     2     r-----    170.3
sles10                                         256     1                 0.0
sles10-1                                       256     1                 0.3
x1                                         5   128     1     -b----      6.7
haifa-suse:~ #
 I am strugling with it long time..
Any idea how to make it works?
Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.