[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Networking fails for all but one domU



Hi all,

I've been doing some experimenting with Xen and have been happy with the results for my first domU (called gutsy); so much so I have decided to use Xen on my 4X core Xeon system. Unfortunately, I can't seem to get networking on any other domU (called mailtest). ANy help you could provide would be greatly appreciated!

Here is my relevant info:

GRUB menu.lst:
--------------------------------------------
[...]
title           Xen 3.1 / Ubuntu 7.10, kernel 2.6.22-14-xen
root            (hd0,0)
kernel          /xen-3.1.gz dom0_mem=262144
module /vmlinuz-2.6.22-14-xen root=/dev/mapper/hydra-root ro xencons=xvc console=xvc0 console=tty1
module          /initrd.img-2.6.22-14-xen
quiet
[...]

DOM0 NETWORK CONFIG
--------------------------------
root@hydra:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:11:43:0F:13:AC
         inet addr:10.0.0.7  Bcast:10.0.0.255  Mask:255.255.255.0
         inet6 addr: fe80::211:43ff:fe0f:13ac/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:166 errors:0 dropped:0 overruns:0 frame:0
         TX packets:131 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:18089 (17.6 KB)  TX bytes:16199 (15.8 KB)

lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         inet6 addr: ::1/128 Scope:Host
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:3 errors:0 dropped:0 overruns:0 frame:0
         TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:336 (336.0 b)  TX bytes:336 (336.0 b)

peth0     Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
         inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
         UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
         RX packets:239 errors:0 dropped:0 overruns:0 frame:0
         TX packets:202 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:87456 (85.4 KB)  TX bytes:24023 (23.4 KB)
         Base address:0xdcc0 Memory:dfee0000-dff00000

vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
         inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
         UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
         RX packets:131 errors:0 dropped:0 overruns:0 frame:0
         TX packets:167 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:16199 (15.8 KB)  TX bytes:18159 (17.7 KB)

vif1.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
         inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
         UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:8 errors:0 dropped:4 overruns:0 carrier:0
         collisions:0 txqueuelen:32
         RX bytes:0 (0.0 b)  TX bytes:463 (463.0 b)

xenbr0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
         UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
         RX packets:12 errors:0 dropped:0 overruns:0 frame:0
         TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:552 (552.0 b)  TX bytes:70 (70.0 b)

WORKING DOMU CONFIG
---------------------------------------------------------

#
# Configuration file for the Xen instance gutsy, created
# by xen-tools 3.5 on Mon Nov  5 13:39:24 2007.
#

#
#  Kernel + memory size
#
kernel      = '/boot/vmlinuz-2.6.22-14-xen'
ramdisk     = '/boot/initrd.img-2.6.22-14-xen'
memory      = '1024'
vcpus       = '4'
extra       = 'xencons=xvc'
pci         = ['05:00.0']

#
#  Disk device(s).
#
root        = '/dev/sda1 ro'
disk = [ 'file:/root/domains/gutsy/disk.img,sda1,w', 'file:/root/domains/gutsy/swap.img,sda2,w' ]

#
#  Hostname
#
name        = 'gutsy'

#
#  Networking
#
dhcp        = 'dhcp'
vif         = [ '' ]

#
#  Behaviour
#
on_poweroff = 'destroy'
on_reboot   = 'restart'
on_crash    = 'restart'


BROKEN DOMU CONFIG
-------------------------------------------------
#
# Configuration file for the Xen instance mailtest, created
# by xen-tools 3.5 on Mon Nov 12 07:55:55 2007.
#

#
#  Kernel + memory size
#
kernel      = '/boot/vmlinuz-2.6.22-14-xen'
ramdisk     = '/boot/initrd.img-2.6.22-14-xen'
memory      = '256'
#extra       = 'xencons=xvc'
extra       = 'xencons=tty'

#
#  Disk device(s).
#
root        = '/dev/sda1 ro'
disk = [ 'file:/root/domains/mailtest/disk.img,sda1,w', 'file:/root/domains/mailtest/swap.img,sda2,w' ]

#
#  Hostname
#
name        = 'mailtest'

#
#  Networking
#
dhcp        = 'dhcp'
vif         = [ '' ]

#
#  Behaviour
#
on_poweroff = 'destroy'
on_reboot   = 'restart'
on_crash    = 'restart'


ATTEMPT TO BRING UP NETWORK MANUALLY
--------------------------------------------------------
root@mailtest:~# ifconfig
lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         inet6 addr: ::1/128 Scope:Host
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

root@mailtest:~# ifup eth0
eth0: ERROR while getting interface flags: No such device
There is already a pid file /var/run/dhclient.eth0.pid with pid 1
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
eth0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth0.
root@mailtest:~# ifconfig -a
eth4      Link encap:Ethernet  HWaddr 00:16:3E:02:5B:14
         BROADCAST MULTICAST  MTU:1500  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         inet6 addr: ::1/128 Scope:Host
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

root@mailtest:~# ifup eth4
Ignoring unknown interface eth4=eth4.

MAILTEST DMESG OUTPUT
--------------------------------------------------------------
root@mailtest:~# dmesg
[ 0.000000] Linux version 2.6.22-14-xen (buildd@crested) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:20:20 GMT 2007 (Unofficial) [ 0.000000] Command line: root=/dev/sda1 ro ip=:1.2.3.4::::eth0:dhcp xencons=tty
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 0000000010800000 (usable)
[    0.000000] Entering add_active_range(0, 0, 67584) 0 entries of 256 used
[    0.000000] end_pfn_map = 67584
[  619.126988] Entering add_active_range(0, 0, 67584) 0 entries of 256 used
[  619.129287] Zone PFN ranges:
[  619.129292]   DMA             0 ->    67584
[  619.129294]   DMA32       67584 ->    67584
[  619.129296]   Normal      67584 ->    67584
[  619.129299] early_node_map[1] active PFN ranges
[  619.129301]     0:        0 ->    67584
[  619.129307] On node 0 totalpages: 67584
[  619.133403]   DMA zone: 924 pages used for memmap
[  619.133410]   DMA zone: 0 pages reserved
[  619.133414]   DMA zone: 66660 pages, LIFO batch:15
[  619.138134]   DMA32 zone: 0 pages used for memmap
[  619.138146]   Normal zone: 0 pages used for memmap
[  619.138171] No mptable found.
[  619.139236] PERCPU: Allocating 25096 bytes of per cpu data
[  619.139266] Built 1 zonelists.  Total pages: 66660
[ 619.139271] Kernel command line: root=/dev/sda1 ro ip=:1.2.3.4::::eth0:dhcp xencons=tty
[  619.139987] Initializing CPU#0
[  619.140311] PID hash table entries: 2048 (order: 11, 16384 bytes)
[  619.140361] Xen reported: 2793.180 MHz processor.
[  619.140396] Console: colour dummy device 80x25
[ 619.140755] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 619.141069] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[  619.141159] Software IO TLB disabled
[ 619.143983] Memory: 230444k/270336k available (2343k kernel code, 31348k reserved, 1193k data, 208k init) [ 619.144056] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 619.208403] Calibrating delay using timer specific routine.. 5596.03 BogoMIPS (lpj=11192077)
[  619.208451] Security Framework v1.0.0 initialized
[  619.208466] SELinux:  Disabled at boot.
[  619.208497] Mount-cache hash table entries: 256
[  619.208735] CPU: Trace cache: 12K uops, L1 D cache: 16K
[  619.208753] CPU: L2 cache: 1024K
[  619.208772] CPU: Physical Processor ID: 3
[  619.208784] CPU: Processor Core ID: 0
[  619.208799] SMP alternatives: switching to UP code
[  619.209426] Freeing SMP alternatives: 23k freed
[  619.209662] Early unpacking initramfs... done
[  619.231924] Brought up 1 CPUs
[  619.232577] NET: Registered protocol family 16
[  619.233905] Brought up 1 CPUs
[  619.233925] PCI: Fatal: No config space access function found
[  619.233931] PCI: setting up Xen PCI frontend stub
[  619.234583] ACPI: Interpreter disabled.
[  619.234593] Linux Plug and Play Support v0.97 (c) Adam Belay
[  619.234605] pnp: PnP ACPI: disabled
[  619.234999] xen_mem: Initialising balloon driver.
[  619.237090] Setting mem allocation to 262144 kiB
[  619.237358] PCI: System does not support PCI
[  619.237369] PCI: System does not support PCI
[  619.237434] NET: Registered protocol family 8
[  619.237443] NET: Registered protocol family 20
[  619.238005] NET: Registered protocol family 2
[  619.241015] Time: xen clocksource has been installed.
[ 619.265051] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 619.265125] TCP established hash table entries: 16384 (order: 6, 393216 bytes)
[  619.265304] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[  619.265460] TCP: Hash tables configured (established 16384 bind 16384)
[  619.265471] TCP reno registered
[  619.277154] checking if image is initramfs... it is
[  619.300762] Freeing initrd memory: 21024k freed
[  619.314832] audit: initializing netlink socket (disabled)
[  619.314877] audit(1194875007.313:1): initialized
[  619.317328] VFS: Disk quotas dquot_6.5.1
[  619.317429] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[  619.317597] io scheduler noop registered
[  619.317605] io scheduler anticipatory registered
[  619.317612] io scheduler deadline registered
[  619.317780] io scheduler cfq registered (default)
[  619.342642] rtc: IRQ 8 is not free.
[  619.342792] Linux agpgart interface v0.102 (c) Dave Jones
[ 619.343520] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 619.343807] input: Macintosh mouse button emulation as /class/input/input0
[  619.348255] Xen virtual console successfully installed as tty1
[  619.348404] Event-channel device installed.
[  619.372234] netfront: Initialising virtual ethernet driver.
[  619.373348] PNP: No PS/2 controller found. Probing ports directly.
[  619.374202] i8042.c: No controller found.
[  619.374449] mice: PS/2 mouse device common for all mice
[  619.374657] TCP cubic registered
[  619.374693] NET: Registered protocol family 1
[  619.375151] xen-vbd: registered block device major 8
[  619.375174] blkfront: sda1: barriers enabled
[  619.376323] blkfront: sda2: barriers enabled
[  619.381900] netfront: device eth0 has copying receive path.
[  619.473025] XENBUS: Device with no driver: device/console/0
[ 619.473039] /build/buildd/linux-source-2.6.22-2.6.22/debian/build/custom-source-xen/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[  619.473057] Freeing unused kernel memory: 208k freed
[ 619.791389] AppArmor: AppArmor initialized<5>audit(1194875007.789:2): type=1505 info="AppArmor initialized" pid=930
[  619.804207] fuse init (API version 7.8)
[ 619.814653] Failure registering capabilities with primary security module.
[  619.869604] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 619.889060] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
[  620.461021] EXT3-fs: INFO: recovery required on readonly filesystem.
[  620.461041] EXT3-fs: write access will be enabled during recovery.
[  621.019360] kjournald starting.  Commit interval 5 seconds
[  621.019402] EXT3-fs: recovery complete.
[  621.040947] EXT3-fs: mounted filesystem with ordered data mode.
[ 622.932684] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[  628.901998] EXT3 FS on sda1, internal journal
[  630.964324] NET: Registered protocol family 17
[  632.712705] NET: Registered protocol family 10
[  632.712806] lo: Disabled Privacy Extensions


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.