[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] eth0 disappears replaced by eth1

On Thursday 08 November 2007, oturpin@xxxxxxx wrote:
>  Hello,
>  I have just installed xen 3.1
>  After booting kernel (without xen) I have one eth0 with static IP
> NIC is a nvidia MCP65 ethernet on Asus M2N-X
> motherboard.
>  After booting with xen kernel, eth0 disappears (config file still
> present). No peth0 visible. And eth1 has appeared with default config
> (it has not inherited the eth0 config).
>  ifconfig shows lo and xenbr0 only, nothing else.
>  ifconfig -a shows all the vif, xenbr0, eth1 but no eth0 and no
> peth0. Network is not operational.
>  Does anyone have an idea of what is going on ?

        udev issues? take a look at /etc/udev/rules/z25_persistent-net.rules or 
something similar if your distro is not debian.

Christian Lyra


  A well-used door needs no oil on its hinges.
  A swift-flowing stream does not grow stagnant.
  Neither sound nor thoughts can travel through a vacuum.
  Software rots if not used.
  These are great mysteries. 
                                                The Tao Of Programing

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.