[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Xen 3.2 is not loading on FC8 - Error: Kernel panic -Attempted to kill init


  • To: "Argyro Andreou" <argyro.andreou@xxxxxxxxx>
  • From: weiming <zephyr.zhao@xxxxxxxxx>
  • Date: Thu, 14 Feb 2008 14:26:27 -0500
  • Cc: xen-users@xxxxxxxxxxxxxxxxxxx
  • Delivery-date: Thu, 14 Feb 2008 11:27:08 -0800
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=J5WaAMP3UPZK3F2n4EFNfvpQP4GUjHjuAwXVfCK0Q41KAUx7Xr36ZPbyGLo52eL+5NzF4KQ5+RHFlNHM0DCAL/i9Pnk/7qL6N2pXfnJQ9+Ctv9KOiuPnTLvSXJWj1G6PMGqotrcxrBE5xoZP649Os6GwpdOP4BxG/GoeCZ5nt98=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

maybe you need to explicitly compile them

make linux-2.6-xen-config CONFIGMODE=menuconfig

select the related drivers

On Thu, Feb 14, 2008 at 2:21 PM, Argyro Andreou <argyro.andreou@xxxxxxxxx> wrote:
When I try to create my inirtd image the way you said yesterday it says that there is no ata_generic driver for the kernel. So to actually succeed in creating my initrd image I need to ommit the scsi modules which I think it's creating the problem. FC8 has it ata_generic but it's no where to be found in the xen-linux.  How do I get it to compile with the ata drivers? Any ideas???
 
Thanks
 
Argyro

On Thu, Feb 14, 2008 at 2:10 PM, weiming <zephyr.zhao@xxxxxxxxx> wrote:
I find that most of those in ata directory are moved to scsi directory in xen-linux



On Thu, Feb 14, 2008 at 1:58 PM, Argyro Andreou <argyro.andreou@xxxxxxxxx> wrote:
I just go into /lib/modules
 
There you will see two directories one for the xen-linux-kernel and one for your standard linux distro in my case FC8. By going into those 2 directories then going into /kernel/drivers I see that the ata driver directory is missing from the xen-linux whereas it's present for FC8
 
Thanks
Argyro

On Thu, Feb 14, 2008 at 1:53 PM, weiming <zephyr.zhao@xxxxxxxxx> wrote:
I guess it's close. ata driver may matter!
how do you check the drivers? Maybe I can check the settings on my machine

On Thu, Feb 14, 2008 at 1:39 PM, Argyro Andreou <argyro.andreou@xxxxxxxxx> wrote:
I did a comparison of the drivers included in the linux-zen kernel and the drivers FC8 has. The only difference is that the linux-xen drivers do not include the ata drivers. Is the linux-kernel downloaded inclomplete? How do I get it to download the ata drivers as well?
 
Thanks
Argyro

On Thu, Feb 14, 2008 at 10:20 AM, Argyro Andreou <argyro.andreou@xxxxxxxxx> wrote:


Any ideas how to get it included? Or what I'm doing wrong and it's not compiling the sata controller? LEt me know if you need me to post any info to figure out what's happening.
 
Thanks !!!
Argyro

On Thu, Feb 14, 2008 at 10:12 AM, weiming <zephyr.zhao@xxxxxxxxx> wrote:
I guess it's related with the sata controller driver which should be included in your initrd file.


On Thu, Feb 14, 2008 at 9:59 AM, Argyro Andreou <argyro.andreou@xxxxxxxxx> wrote:
So then what type of changes would I have to make to the config file to compile the kernel the way you describe? I took a look at it and I it seems to me that the write options are enabled.
 
Thanks for your help !!!
Argyro

On Wed, Feb 13, 2008 at 4:27 PM, Tait Clarridge <Tait.Clarridge@xxxxxxxxxxxx> wrote:
I remember that I had to compile all the RAID + LVM section of the kernel config directly into the kernel, and not as modules. As well I had to have each of the USB host sections as modules and the AHCI support built as a module.

Then I compiled my initrd with sd_mod, sg, ahci (I think) to get it to find my logical volumes.



From: weiming [mailto:zephyr.zhao@xxxxxxxxx]
Sent: Wednesday, February 13, 2008 4:24 PM
To: Argyro Andreou
Cc: Tait Clarridge; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Xen 3.2 is not loading on FC8 - Error: Kernel panic -Attempted to kill init

I guess some device driver for your sata driver was not loaded, so the kernel can't find the /dev/root device.
Did you change the .config of linux kernel? By default, it should include most of the drivers.
On Feb 13, 2008 4:09 PM, Argyro Andreou <argyro.andreou@xxxxxxxxx> wrote:
Hey Tait,
 
 
When I remove the quiet flag it says the following:
 
Scanning logical volumes
Reading all physical volumes
No volume groups found
Activating logical volumes
    Volume group VolGroup00 not found
Creating root device
Mounting root filesystem
mount: could not find filesystem /dev/root
Setting up other filesystems
Setting up new root fs
setuproot: moving /dev failed: No such file pr directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such file ot directory
seturoot: error mounting /sys: No such file to directory
Switching to new root and running init
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or directory
Booting has failed
Kernel panic-not synching: Attempted to kill init!
 
 
When installing Fedora Core 8 I didn't do custom partitioning I used the default option. If custom partitioning is need can you please tell me exactly what partitions are needed?
 
Thanks
Argyro
On Feb 13, 2008 3:48 PM, Tait Clarridge <Tait.Clarridge@xxxxxxxxxxxx> wrote:
Hi Argyro,
 
Could you take out the "quiet" switch in the Xen kernel boot args and tell us exactly what it says? You might also want to add a "noreboot" in that section so you can write down exactly what it says.
 
Thanks,
-Tait
 
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Argyro Andreou
Sent: Wednesday, February 13, 2008 3:36 PM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Xen 3.2 is not loading on FC8 - Error: Kernel panic -Attempted to kill init
 
Hi all,

I compiled and installed Xen 3.2 source on FC8. Compilation and installation completed with no errors. However when I try to load Xen I get an error: Kernel panic - Attempted to kill init !!!

This is my grub configuration:

# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE:  You have a /boot partition.  This means that
#          all kernel and initrd paths are relative to /boot/, eg.
#          root (hd0,0)
#          kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00
#          initrd /initrd-version.img
#boot=/dev/sda
default=0
timeout=15
splashimage=(hd0,0)/grub/splash.xpm.gz
#hiddenmenu
title Fedora (2.6.23.1-42.fc8)
    root (hd0,0)
    kernel /vmlinuz-2.6.23.1-42.fc8 ro root=/dev/VolGroup00/LogVol00 rhgb quiet
    initrd /initrd-2.6.23.1-42.fc8.img

title Fedora Core 8 + Xen 3.2.0
    root (hd0,0)
    kernel /xen-3.2.1-rc1-pre.gz
    module /vmlinuz-2.6.18.8-xen ro root=/dev/VolGroup00/LogVol00 rhgb quiet
    module /initrd-2.6.18.8-xen.img   

I tried loading Xen without initrd also. But I get the same error.

Please can anyone help me. I've trying to solve this problem since last Friday and I can't see any light at the end of the tunnel


Regards
Argyro


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users








_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users





_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.