RE: [Xen-users] iSCSI root on Dom0

["Ross S. W. Walker" <rwalker@xxxxxxxxxxxxx>]

Joe Royall wrote:
> 
> I am getting the following error on boot on a new install Centos 51:
> 
> #/bin/sh ro no such file or directory
> then a kernel panic
> 
> I have traced it to the call 'switchroot' in the init script 
> in the initrd.
> 
> the exact same build without zen has no problems.
> 
> the boot messages look like:
> 
> Attaching to iSCSI storage
> iscsistart: transport class version 2.0-724. iscsid version 2.0-865
> iscsistart: version 2.0-865
> scsi0 : iSCSI Initiator over TCP/IP
> iscsistart: connection1:0 is operational now
>     Vendor: IET    Model: Controler    Rev: 0001
>     Type: RAID                ANSI SCSI revision: 05
>     Vendor    Model: VIRTUAL-DISK    Rev: 0001
>     Type:    Direct -Access        ANSI SCSI revision: 05
> SCSI device sda: 20971520 512-byte hdwr sectors (10737 MB)
> sda: Write Protect is off
> SCSI device sda: drive cache: write back
> SCSI device sda: 20971520 512-byte hdwr sectors (10737 MB)
> sda: Write Protect is off
> SCSI device sda: drive cache: write back
>     sda: sda1
> sd 0:0:0:1: Attached scsi disk sda
> Waiting for driver initialization
> Scanning and configuring dmraid supported devices
> Create root device
> Mounting root filesystem.
> kjournaled starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with orded data mode.
> Setting up other filesystems.
> Setting up new root fs
> no fstab.sys, mounting internal defaults
> Copying DHCP lease
> Switching to new root and running init
> #/bin/sh ro no such file or directory
> 
> 
> /tftpboot/pxelinux.cfg/default .....
> 
> 
> default iscsi_root_xen
> prompt 0
> 
> label manual_install
>         KERNEL /Centos/51/kickstart/vmlinuz
>         APPEND initrd=/Centos/51/kickstart/initrd.img
> 
> label kickstart_xen
>         KERNEL /Centos/51/kickstart/vmlinuz
>         APPEND initrd=/Centos/51/kickstart/initrd.img 
> ks=http://192.168.1.202/anaconda-ks.cfg ksdevice=link noipv6
> 
> label kickstart_noxen
>         KERNEL /Centos/51/kickstart/vmlinuz
>         APPEND initrd=/Centos/51/kickstart/initrd.img 
> ks=http://192.168.1.202/anaconda-ks.noxen.cfg ksdevice=link noipv6
> 
> label iscsi_root_xen
>         KERNEL mboot.c32
>         APPEND /Centos/boot/xen.gz-2.6.18-53.el5 --- 
> /Centos/boot/vmlinuz-2.6.18-53.el5xen ro root=LABEL=/ noipv6 
> --- /Centos/boot/initrd-2.6.18-53.el5xen.img
> 
> 
> label iscsi_root_noxen
>   KERNEL /Centos/boot/vmlinuz-2.6.18-53.el5
>   APPEND initrd=/Centos/boot/initrd-2.6.18-53.el5.img ro 
> root=LABEL=/  noipv6
> 
> 
> the xen and the noxen have different iscsi partitions and 
> only one is activated at a time.
> 
> the xen and noxen kickstarts are the same execpt the xen 
> includes the package @Virtualization
> 
> Any ideas?

I suggest starting out by looking at the kernel configs for
both versions to see if anything differs besides the Xen
options. Maybe upstream forgot to compile it the iSCSI
support into the Xen kernel?

-Ross

______________________________________________________________________
This e-mail, and any attachments thereto, is intended only for use by
the addressee(s) named herein and may contain legally privileged
and/or confidential information. If you are not the intended recipient
of this e-mail, you are hereby notified that any dissemination,
distribution or copying of this e-mail, and any attachments thereto,
is strictly prohibited. If you have received this e-mail in error,
please immediately notify the sender and permanently delete the
original and any copy or printout thereof.


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users