Re: [Xen-users] arp who-has packets not seen in Dom0 even by tcpdump (Solved)

[ÐÐÑÐÐÑÐÐÐ ÐÐÐÐÑÐÐÐÑ <litnialex@xxxxxxxxxxx>]

Hello Igor,
Thanks for the advice - it really helped!

I compiled the latest available e1000 driver version 7.6.15.5 , copied 
it instead of existing one, then
depmod -a
/etc/init.d/networking stop; rmmod e1000; sleep 1; modprobe e1000; 
/etc/init.d/networking start
Now arp-who has broadcast packest does reach Dom0 :)

Good luck!


Igor Chubin wrote:
> On Mo, MÃr 31, 2008 at 06:19:30 +0400, ÐÐÑÐÐÑÐÐÐ ÐÐÐÐÑÐÐÐÑ wrote:
>   
> > Hi all,
> > I'm running Xen-3.2 and linux-image-2.6.18 as Dom0 kernel on a VT-x  
> > processor. The problem is that  broadcast arp who-has  packets  are not  
> > seen in Dom0 kernel. I've tried both precompiled debian kernel and  
> >     
> ...
>   
> > Is it a bug in xen or e1000 driver? how can i debug it and what  
> > additional info can i provide?
> >     
>
> can you take new e1000 module sources [1]
> and rebuild it?
>
> [1] http://e1000.sourceforge.net/
>
>   
--
Litnitchii Alexander
Information Security Engineer
HORS B.V.
http://www.horse21.net



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users