[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] HDD-performance on HVM winxp
Hi, Iometer have been installed from http://www.iometer.org/ under XP. Transfer request size to 1MB and 128k and measured. 1MB: Read: 35MB/s Write: 10MB/s 128k: Read: 21MB/s Write: 7,5MB7s I think that there is a problem with your setup. My setup uses a LVM Volume on Software Raid1 on two SATA Drives. XEN 3.2.1build from Source. But I have a problem with the load in dom0, when XP ist idle. The CPU in Xentop is nearly 100% all the time, in the xp dom. What is your cpu level of the HVM Domain. Thanks. Alexander Junghans Daniel Schwager schrieb: Hi together, i'm running a winxp hvm-domain without the GPLPV-driver. I imported an iscsi-target as a lun for the winxp-domain and run an iometer test directly on the winxp-domain: Blocksize type MB/sec ------------------------------ 1 MB read 25 MB 1 MB write 0.8 MB 128 kb read 25 MB 128 kb write 0.8 MB If I run the same test on the xen-domain0 (hostsystem)using iometer's dynamo, I got Blocksize type MB/sec ------------------------------ 1 MB read 66 MB 1 MB write 55 MB My problem ist the 0.8MB/sec in the winxp-domain... Is there a way to track down the performance issue ? [root@xen04 /var/log/xen]$ rpm -qa | grep xen kernel-xen-devel-2.6.21-2957.fc8 kernel-xen-devel-2.6.21.7-3.fc8 xen-libs-3.1.2-2.fc8 kernel-xen-2.6.21.7-3.fc8 xen-3.1.2-2.fc8 xen-libs-3.1.2-2.fc8 kernel-xen-2.6.21-2957.fc8 kernel-xen-2.6-doc-2.6.21.7-3.fc8 [root@xen04 /var/log/xen]$ uname -a Linux xen04.test 2.6.21-2957.fc8xen #1 SMP Tue Feb 12 13:07:27 EST 2008 x86_64 x86_64 x86_64 GNU/Linux regards Danny _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |