[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] help needed



Philip,

> I need a consultant to help me install the latest Kernel 3.2. I compiled it
> successfully under Centos 5.1 64 Bits, did "make world", "make install",
> end it did not show any error.

Good start.

> I changed the grub.conf file as per the 
> README, but the machine did not boot.

We'll need more information here.  Do you have physical access to the machine?  
If so, did you see anything interesting on the screen?

You should see:
1) computer's BIOS screen
2) Grub menu
3) Xen's initial bootup text (including the Xen version in big friendly 
letters).  This will scroll past very quickly.
4) dom0 Linux's kernel bootup text.  This will probably scroll quickly too.
5) dom0 Linux's userspace startup text.

New Xen installs often fail at point 3 (if the grub configuration is somehow 
broken, or Xen was not successfully installed), point 4 (for various 
configuration reasons), or point 5.

If the failure is at point 3 (you're seeing grub but you're not seeing Xen 
start) then we'll need to verify your Xen install and grub config.

If your failure is at point 4 then the system may be rebooting before you have 
a chance to see what's gone wrong.  If you add "noreboot" to Xen's 
commandline in your grub config then the system will pause at this point and 
allow you to inspect what's gone wrong.  You'll need to power cycle the 
machine to reboot it.

> There is must be something missing in 
> the instructions. If somebody who can help me

Unfortunately, the instructions are sometimes better treated as "guidelines" 
rather than a definite sequence of steps to reach a working system.  Open 
Source developers tend not to produce good documentation :-(

> I will pay him/her via 
> paypal. Has anybody succeded installing it under Centos 5.1 64 bits?

Assuming you've not found a consultant to hire privately, lets try and work 
through this on the mailing list a bit.  Any troubleshooting we succeed in 
doing should be useful to any consultant you might hire, especially if he / 
she is working remotely.

Cheers,
Mark

-- 
Push Me Pull You - Distributed SCM tool (http://www.cl.cam.ac.uk/~maw48/pmpu/)

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.