Re: [Xen-users] invalid kernel

[Sadique Puthen <sputhenp@xxxxxxxxxx>]

Pls keep replies to the list.

Can we see ur guest config file?

--Sadique

santhosh kumar wrote:
> Hi Sadique,
>
> Can I have your help.
> the problem is that i have centos 5.1 as the OS which has a default 
> xen-.3.0.3-25.el5.
> when ever i try to install new guest(rhel5 or windows xp) it gives 
> following error:
> Kernel panic - not syncing: Attempted to kill init!
>
> i hav attached the config file.
>
> full out put is here.
>
> Using config file "/root/Desktop/xmexample/xm2".
> Started domain Rhel5
> Linux version 2.6.18-8.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxx 
> <mailto:mockbuild@xxxxxxxxxxxxxxxxxxx>) (gcc version 4.1.1 20070105 
> (Red Hat 4.1.1-52)) #1 SMP Thu Mar 15 21:02:53 EDT 2007
> BIOS-provided physical RAM map:
>  Xen: 0000000000000000 - 0000000020800000 (usable)
> 0MB HIGHMEM available.
> 520MB LOWMEM available.
> NX (Execute Disable) protection: active
> ACPI in unprivileged domain disabled
> Built 1 zonelists.  Total pages: 133120
> Kernel command line:  root=/dev/sda ro
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> CPU 0 irqstacks, hard=c071b000 soft=c06fb000
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Xen reported: 2094.748 MHz processor.
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Software IO TLB disabled
> vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
> Memory: 510080k/532480k available (2017k kernel code, 13744k reserved, 
> 824k data, 172k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor 
> mode... Ok.
> Calibrating delay using timer specific routine.. 5238.88 BogoMIPS 
> (lpj=10477768)
> Security Framework v1.0.0 initialized
> SELinux:  Initializing.
> SELinux:  Starting in permissive mode
> selinux_register_security:  Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> Checking 'hlt' instruction... OK.
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 16k freed
> Brought up 1 CPUs
> checking if image is initramfs... it is
> Freeing initrd memory: 3373k freed
> Grant table initialized
> NET: Registered protocol family 16
> ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06CAAA0 could 
> not acquire Mutex [2] [20060707]
> Brought up 1 CPUs
> PCI: setting up Xen PCI frontend stub
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI: disabled
> xen_mem: Initialising balloon driver.
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: System does not support PCI
> PCI: System does not support PCI
> NetLabel: Initializing
> NetLabel:  domain hash size = 128
> NetLabel:  protocols = UNLABELED CIPSOv4
> NetLabel:  unlabeled traffic allowed by default
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx 
> <mailto:tigran@xxxxxxxxxxx>>
> audit: initializing netlink socket (disabled)
> audit(1210058158.840:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SELinux:  Registering netfilter hooks
> Initializing Cryptographic API
> ksign: Installing public key data
> Loading keyring
> - Added public key EE79A493AEE5EDC9
> - User ID: CentOS (Kernel Module GPG key)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> rtc: IRQ 8 is not free.
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.101 (c) Dave Jones
> RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
> Xen virtual console successfully installed as xvc0
> Event-channel device installed.
> Console: switching to colour frame buffer device 100x37
> input: Xen Virtual Keyboard/Mouse as /class/input/input0
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 50MHz system bus speed for PIO modes; override with 
> idebus=xx
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> PNP: No PS/2 controller found. Probing ports directly.
> i8042.c: No controller found.
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 4.39
> TCP bic registered
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Using IPI No-Shortcut mode
> XENBUS: Device with no driver: device/vbd/768
> XENBUS: Device with no driver: device/vif/0
> Freeing unused kernel memory: 172k freed
> Write protecting the kernel read-only data: 355k
> USB Universal Host Controller Interface driver v3.0
> SCSI subsystem initialized
> Kernel panic - not syncing: Attempted to kill init!
>
> can i even know the difference between sdx and hdx (x=a,b,c....)
>
> Thanks & Regards
> san

--
Red Hat Software Services (India) Pvt. Ltd.
6th Floor, East Wing
Marisoft-III, Marigold Premises
Kalyani Nagar, Pune, Maharashtra
India, Pin-411014

Mobile +919890354236
Tel: +91 20 40057363

If you want things you've never had, you have to do things you've never done. 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users