[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] domU ignores MTU

  • To: Xen Users <xen-users@xxxxxxxxxxxxxxxxxxx>
  • From: Christoph Fritsche <chr.fr@xxxxxxx>
  • Date: Sun, 11 May 2008 20:32:24 +0200
  • Delivery-date: Sun, 11 May 2008 11:31:42 -0700
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hi list,

I got a wired network problem with a DNATed domU. During a TCP session the domU tries to send juboframes which get lost on the path.

I'm using almost stock Debian etch with Xen 3.2.1 from backports.

tcpdump says:
17:50:27.595327 IP (tos 0x0, ttl 64, id 48632, offset 0, flags [DF], proto: TCP (6), length: *2948*) > . 115841:118737(2896) ack 119 win 181 <nop,nop,timestamp 1187477 3076040081>

The TCP handshake has committed a segemt size of 1460. In ifconfig the MTU shows up as 1500.

The domU is linked with dom0 by a internal bridge and dom0 acts as gateway.

It looks like the frame makes it through the dom0 and gets dropped somewhere on the path, probably the next router. The retransmit is done with a proper size. Some packets later the same behavior occurs again resulting in an overall poor network performance.

Is there a way, other than ifconfig, to set the MTU, or force Xen not to send juboframes?

Thanks for your thoughts on this issue.

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.