[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] How to Export COM port to guest domain

  • To: "Jefferson E. Noxon" <jeff@xxxxxxxxxxxxxx>
  • From: "Christopher Isip" <cmisip@xxxxxxxxx>
  • Date: Thu, 15 May 2008 16:47:34 -0400
  • Cc: xen-users@xxxxxxxxxxxxxxxxxxx
  • Delivery-date: Thu, 15 May 2008 13:48:11 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=dOqqlo3ePZMXV8R734QmA4Zxn3n2F5+IWlnGGSWTfh/bXvKbwhBiYA29Bf7fNx8k74BhI16PvHMvc3MvpSyxAoxRMMjmxYy6AJDm0JmtRtcmWzfJzFYBx9RIExntl2jVqADjl2tEV6SMtqVSUZImXo5VZPUkuLFazvy1qiSqqeU=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

On Thu, May 15, 2008 at 2:59 PM, Jefferson E. Noxon <jeff@xxxxxxxxxxxxxx> wrote:
I've run into the same problem, except that I need to provide serial ports to a fully virtualized Windows guest.

This is my understanding:

You need Xen 3.2+, VT-d capable hardware, and PCI passthrough, and probably a PCI-e serial adapter or a PCI-e USB adapter with a USB to Serial dongle.  VT-d won't let you pass through a legacy (non-Express) PCI device without passing all of your other legacy PCI devices behind the same bridge.

It's a shame that it isn't possible to pass USB or Serial devices without VT-d.

I plan to get a PCI-e USB controller and a VT-d capable motherboard soon.

I hope someone proves me wrong!

Johnson, Tony M wrote:

Using Xen 3.1 and Fedora 7, is it possible to export the serial interface such that I can access
external devices on COM1 or COM2?

I am uncertain if PCI pass-thru is needed or if there's nothing to configure for this to work in
a fully virtualized Linux guest.

Any help would be greatly appreciated.

Tony Johnson


Xen-users mailing list

Xen-users mailing list

I installed mythtv but needed a way to control the motorola dvr via serial cable (usb to serial).  The way I managed to get this to work is to use ssh remote command execution.  Basically, the domU executes a script that runs in the dom0 to change channels.  I dont know if something similar would apply to your case.


Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.