[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] Networking problem



        In my compiling experience (some time ago), the networking script
created rules in the forwarding chain of iptables.  These were good enough
(though I still made my own), but would only matter after IP forwarding was
enabled in the kernel.  IP forwarding may not be enabled automatically when
you compile to install (seems like I had to figure out how to enable it
manually at one point).  Additionally, if there are no rules in the
forwarding chain, and the default action for said chain is not accept (i.e.
it is reject or drop), no traffic will go through regardless (I never tried
with no rules and the action set to accept, so I can't confirm that would
work).  Those are the only two thoughts I have.  Beyond that, assuming
everything outside of Xen is good (dhcp server and vista settings), you'd be
dealing with an issue unfamiliar to me.
        Dustin

-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Matthew Donovan
Sent: Thursday, June 12, 2008 15:15
To: Dustin.Henning@xxxxxxxxxxx
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] Networking problem

Setting the "bridge=eth0" didn't change anything.

The Vista guest has a network device.  It's IP address comes up as
169.254.28.48 while the host is on a 192.168.1.0 network.

On the working systems (we have more than one in the office) there is
libvirtd and dnsmasq running.  I've seen references to those in other Xen
help stuff (e.g. "libvirtd starts dnsmasq which does dhcp for guest OSes".
Do I need to get a libvirtd running for networking to work?

Thanks
-matthew

> -----Original Message-----
> From: Dustin Henning [mailto:Dustin.Henning@xxxxxxxxxxx] 
> Sent: Thursday, June 12, 2008 1:22 PM
> To: 'Matthew Donovan'
> Cc: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-users] Networking problem
> 
>       Maybe you were previously using an older version, or maybe you
> compiled different than they did for the rpms you are 
> referring to.  Based
> on your brctl output, you should be using bridge=eth0 because peth0 is
> connected to eth0, and as such, your virtual machine, 
> connected to virbr0,
> has no connection to the real world.  OTOH, if you aren't 
> getting a network
> device in Vista, or it is malfunctioning, I don't know what 
> to tell you.
>       Dustin
> 
> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of 
> Matthew Donovan
> Sent: Thursday, June 12, 2008 13:08
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-users] Networking problem
> 
> I installed Xen (3.2 testing) from source (the rpm's didn't 
> work on this
> system for some reason) and when I install a Windows Vista 
> guest I can't get
> the networking to work.  I've gotten Vista guests working 
> fine on systems
> that I installed from rpms.
> 
> I'm not really sure what to look at.  The output of brctl is:
> 
> [root@moosen scripts]# brctl show
> bridge name     bridge id               STP enabled     interfaces
> eth0            8000.0019b932c635       no              peth0
> virbr0          8000.b62bbdcde14d       yes             tap0
>                                                         vif13.0
> 
> 
> In my Xen configuration file, the interface is specified as:
> vif = [ 'type=ioemu, bridge=virbr0' ]
> 
> Could this be something to do with compiling Xen from source?  Maybe I
> missed something there.
> 
> Any help is appreciated.
> Thanks
> -matthew
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.