[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Xen installation : Python C API mismatch



On Thursday 17 July 2008, you wrote:
> I just did make install-tools and it didn't change anything. I don't know
> if I was supposed to do something else for it to take action.

Bad luck with getting the free trip, I was hoping to avoid that for you. :-(

make install-tools should work, it's only a userspace problem you have.  Did 
you try to uninstall the existing userspace tools first as I suggested?  
Reinstalling Xen / XenLinux will *definitely* not help with Python <-> C API 
problems.

I went and poked in the Makefile for you and found that "make uninstall" runs 
the following (I've removed the lines that delete the hypervisor and the 
XenLinux kernel stuff, since you want to keep those).

You should substitute appropriate values for the environment variables.  $(D) 
should be set to the empty string, LIBDIR is probably /usr/lib.  Please 
double check the following commands for sanity as you always should before 
rm -rf.  Don't trust me too much :-)

        rm -rf $(D)/etc/init.d/xend*
        rm -rf $(D)/etc/hotplug/xen-backend.agent
        rm -f  $(D)/etc/udev/rules.d/xen-backend.rules
        rm -f  $(D)/etc/udev/xen-backend.rules
        rm -f  $(D)/etc/sysconfig/xendomains
        rm -rf $(D)/var/run/xen* $(D)/var/lib/xen*
        rm -rf $(D)/usr/bin/xen* $(D)/usr/bin/lomount
        rm -rf $(D)/usr/bin/cpuperf-perfcntr $(D)/usr/bin/cpuperf-xen
        rm -rf $(D)/usr/bin/xc_shadow
        rm -rf $(D)/usr/bin/pygrub
        rm -rf $(D)/usr/bin/setsize $(D)/usr/bin/tbctl
        rm -rf $(D)/usr/bin/xsls
        rm -rf $(D)/usr/include/xenctrl.h $(D)/usr/include/xenguest.h
        rm -rf $(D)/usr/include/xs_lib.h $(D)/usr/include/xs.h
        rm -rf $(D)/usr/include/xen
        rm -rf $(D)$(LIBDIR)/libxenctrl* $(D)$(LIBDIR)/libxenguest*
        rm -rf $(D)$(LIBDIR)/libxenstore*
        rm -rf $(D)$(LIBDIR)/python/xen $(D)$(LIBDIR)/python/grub
        rm -rf $(D)$(LIBDIR)/xen/
        rm -rf $(D)/usr/lib/xen/
        rm -rf $(D)/usr/local/sbin/setmask $(D)/usr/local/sbin/xen*
        rm -rf $(D)/usr/sbin/xen* $(D)/usr/sbin/netfix $(D)/usr/sbin/xm
        rm -rf $(D)/usr/share/doc/xen
        rm -rf $(D)/usr/share/xen
        rm -rf $(D)/usr/share/man/man1/xen*
        rm -rf $(D)/usr/share/man/man8/xen*

Cheers,
Mark

> Antoine
>
> On Thu, Jul 17, 2008 at 10:22 PM, Antoine Benkemoun <
>
> antoine.benkemoun@xxxxxxxxx> wrote:
> > Critical failure... machine doesn't boot anymore. I win the free trip !
> >
> > I am trying to do just make install-tools on the second machine just to
> > see if it will change something.
> >
> > Antoine
> >
> >
> > On Thu, Jul 17, 2008 at 10:01 PM, Antoine Benkemoun <
> >
> > antoine.benkemoun@xxxxxxxxx> wrote:
> >> Ah sorry I didn't read your email correctly.
> >>
> >> I will do that afterwards might just as well finish since it's been
> >> running for quite a while...
> >>
> >> Won't be forgetting to do the initrd, thank you for reminder. Already
> >> got trapped previously but the PC was right next to me so it wasn't so
> >> bad.
> >>
> >> Thanks !
> >>
> >> Antoine
> >>
> >>
> >> On Thu, Jul 17, 2008 at 9:55 PM, Mark Williamson <
> >>
> >> mark.williamson@xxxxxxxxxxxx> wrote:
> >>> On Thursday 17 July 2008, Antoine Benkemoun wrote:
> >>> > Thank you for your thorough answer !
> >>> >
> >>> > Indeed I am booting Debian with the Xen kernel perfectly. I don't
> >>> > know
> >>>
> >>> what
> >>>
> >>> > you mean by XenLinux but I'm guessing it's what I am booting or
> >>>
> >>> something
> >>>
> >>> > similar enough.
> >>>
> >>> Sorry.
> >>>
> >>> By XenLinux I mean the Xen-aware Linux you're booting on top of Xen.
> >>>
> >>> > I agree that since it is the same version it shouldn't mess things up
> >>>
> >>> too
> >>>
> >>> > much. I am compiling at the moment using the same tutorial (it had a
> >>> > compiling source page included). It's taking for ever even with a
> >>> > Quad
> >>>
> >>> Core
> >>>
> >>> > Xen machine with 4GB of RAM...
> >>>
> >>> If you're only installing the tools, as I suggested, you only actually
> >>> need to
> >>> do make tools; make install-tools, which should be much faster.  If you
> >>> just
> >>> do "make world" it'll build Xen and the XenLinux, which will take ages
> >>> and
> >>> you already have those.
> >>>
> >>> > I'll keep you updated if this works or if I get a free trip to the
> >>> > datacentre :P
> >>>
> >>> I hope you don't win that prize :-)
> >>>
> >>> Cheers,
> >>> Mark
> >>>
> >>> > Antoine
> >>> >
> >>> > On Thu, Jul 17, 2008 at 9:43 PM, Mark Williamson <
> >>> >
> >>> > mark.williamson@xxxxxxxxxxxx> wrote:
> >>> > > > Thank you for your quick answer.
> >>> > > >
> >>> > > > I installed the 3.1.0 binaries on a Lenny Sid installed. I
> >>> > > > followed
> >>>
> >>> the
> >>>
> >>> > > > "Perfect Xen 3.0 install" tutorial to the letter.
> >>> > > >
> >>> > > > I have the possibility to install from sources but I am somewhat
> >>>
> >>> afraid
> >>>
> >>> > > to
> >>> > >
> >>> > > > do so... Can it crash the machine if installed ontop a previous
> >>>
> >>> install
> >>>
> >>> > > > ? Basically, the machine not rebooting correctly wins me a trip
> >>> > > > to
> >>>
> >>> the
> >>>
> >>> > > > datacentre and that's not fun :P
> >>> > >
> >>> > > Xen doesn't play very well with conflicting installs.  I guess if
> >>>
> >>> you're
> >>>
> >>> > > installing the same version from source that you've just installed
> >>> > > in binaries it's not so likely to screw things up.  That said, most
> >>> > > of
> >>>
> >>> the
> >>>
> >>> > > conflicts are typically in userspace stuff, which shouldn't stop
> >>> > > the machine
> >>> > > actually booting.  I'd also not expect such conflicts to result in
> >>> > > a crash at
> >>> > > runtime, it just usually means Xend doesn't work properly.
> >>> > >
> >>> > > > Is it possible to uninstall a previous Xen install so it doesn't
> >>>
> >>> mess
> >>>
> >>> > > > up everything ?
> >>> > >
> >>> > > Yes, if you can figure out which bits to remove.  I think there's a
> >>>
> >>> "make
> >>>
> >>> > > uninstall" target in the source distribution that should do this
> >>> > > reasonably thoroughly for you; it's not included in the binary
> >>> > > distribution you currently have :-(
> >>> > >
> >>> > > *however* in your case, you have successfully installed Xen and
> >>>
> >>> XenLinux
> >>>
> >>> > > by the sound of it and they're already booting - am I reading you
> >>>
> >>> right?
> >>>
> >>> > > If you get the source distribution for the same version of Xen and
> >>>
> >>> then
> >>>
> >>> > > just
> >>> > > compile / install the userspace tools, that should do.  You
> >>> > > probably don't really need to build Xen / XenLinux lot again, or
> >>> > > even reboot
> >>>
> >>> for
> >>>
> >>> > > that matter.
> >>> > >
> >>> > > You might still need to remove the old userspace libraries to make
> >>>
> >>> Xend
> >>>
> >>> > > work
> >>> > > right.  make uninstall should take them away but it might remove
> >>> > > your
> >>>
> >>> Xen
> >>>
> >>> > > / XenLinux too...  I'd suggest you manually look at what the
> >>> > > Makefile does to see which libraries / binaries to remove, then do
> >>> > > it
> >>>
> >>> yourself.
> >>>
> >>> > > Does that sound reasonably doable to you?  Don't use make
> >>> > > uninstall,
> >>>
> >>> just
> >>>
> >>> > > use it for inspiration when uninstalling the userspace tools.  Then
> >>>
> >>> run
> >>>
> >>> > > make tools-install to build and install a new version of the tools.
> >>> > >
> >>> > > You may need to install a few -dev packages to build successfully.
> >>> > >
> >>> > > Cheers,
> >>> > > Mark
> >>> > >
> >>> > > > On Thu, Jul 17, 2008 at 9:02 PM, Mark Williamson <
> >>> > > >
> >>> > > > mark.williamson@xxxxxxxxxxxx> wrote:
> >>> > > > > These errors typically happen when the Xen code was built
> >>> > > > > against
> >>>
> >>> a
> >>>
> >>> > > > > different
> >>> > > > > version of Python to the one that's available at runtime.  I've
> >>> > >
> >>> > > actually
> >>> > >
> >>> > > > > found these are often harmless but that's probably not an
> >>>
> >>> appropriate
> >>>
> >>> > > > > risk to
> >>> > > > > take for a production machine.
> >>> > > > >
> >>> > > > > Where exactly did you get your install source for Xen from?
> >>>
> >>>  Could
> >>>
> >>> > > > > you just build Xen yourself rather than using a pre-compiled
> >>>
> >>> version?
> >>>
> >>> > > > > Cheers,
> >>> > > > > Mark
> >>> > > > >
> >>> > > > > On Thursday 17 July 2008, Antoine Benkemoun wrote:
> >>> > > > > > Hello,
> >>> > > > > >
> >>> > > > > > I am trying to install Xen 3.1.0 on a Debian Sid. I have been
> >>>
> >>> able
> >>>
> >>> > > > > > to do this type of installation correctly with it working
> >>>
> >>> perfectly
> >>>
> >>> > > before
> >>> > >
> >>> > > > > > but
> >>> > > > >
> >>> > > > > I
> >>> > > > >
> >>> > > > > > have to admit I can't get this one to work.
> >>> > > > > >
> >>> > > > > > Here are the error messages that I get at Xen startup :
> >>> > > > > >
> >>> > > > > > orangene1-hyp:~# /etc/init.d/xend start
> >>> > > > > > /usr/lib/python/xen/xend/server/SrvDaemon.py:20:
> >>>
> >>> RuntimeWarning:
> >>> > > Python
> >>> > >
> >>> > > > > > C API version mismatch for module xen.lowlevel.xc: This
> >>> > > > > > Python
> >>>
> >>> has
> >>>
> >>> > > API
> >>> > >
> >>> > > > > > version 1013, module xen.lowlevel.xc has version 1012.
> >>> > > > > >   import xen.lowlevel.xc
> >>> > > > > > /usr/lib/python/xen/util/security.py:25: RuntimeWarning:
> >>> > > > > > Python
> >>>
> >>> C
> >>>
> >>> > > > > > API version mismatch for module acm: This Python has API
> >>>
> >>> version
> >>>
> >>> > > > > > 1013, module acm has version 1012.
> >>> > > > > >   from xen.lowlevel import acm
> >>> > > > > > /usr/lib/python/xen/xend/xenstore/xsutil.py:8:
> >>> > > > > > RuntimeWarning: Python
> >>> > >
> >>> > > C
> >>> > >
> >>> > > > > API
> >>> > > > >
> >>> > > > > > version mismatch for module xen.lowlevel.xs: This Python has
> >>>
> >>> API
> >>>
> >>> > > > > > version 1013, module xen.lowlevel.xs has version 1012.
> >>> > > > > >   import xen.lowlevel.xs
> >>> > > > > > /usr/lib/python/xen/xend/XendBootloader.py:25:
> >>> > > > > > RuntimeWarning: Python
> >>> > >
> >>> > > C
> >>> > >
> >>> > > > > API
> >>> > > > >
> >>> > > > > > version mismatch for module ptsname: This Python has API
> >>>
> >>> version
> >>>
> >>> > > 1013,
> >>> > >
> >>> > > > > > module ptsname has version 1012.
> >>> > > > > >   from xen.lowlevel import ptsname
> >>> > > > > > /usr/lib/python/xen/xend/server/SrvDaemon.py:20:
> >>>
> >>> RuntimeWarning:
> >>> > > Python
> >>> > >
> >>> > > > > > C API version mismatch for module xen.lowlevel.xc: This
> >>> > > > > > Python
> >>>
> >>> has
> >>>
> >>> > > API
> >>> > >
> >>> > > > > > version 1013, module xen.lowlevel.xc has version 1012.
> >>> > > > > >   import xen.lowlevel.xc
> >>> > > > > > /usr/lib/python/xen/util/security.py:25: RuntimeWarning:
> >>> > > > > > Python
> >>>
> >>> C
> >>>
> >>> > > > > > API version mismatch for module acm: This Python has API
> >>>
> >>> version
> >>>
> >>> > > > > > 1013, module acm has version 1012.
> >>> > > > > >   from xen.lowlevel import acm
> >>> > > > > > /usr/lib/python/xen/xend/xenstore/xsutil.py:8:
> >>> > > > > > RuntimeWarning: Python
> >>> > >
> >>> > > C
> >>> > >
> >>> > > > > API
> >>> > > > >
> >>> > > > > > version mismatch for module xen.lowlevel.xs: This Python has
> >>>
> >>> API
> >>>
> >>> > > > > > version 1013, module xen.lowlevel.xs has version 1012.
> >>> > > > > >   import xen.lowlevel.xs
> >>> > > > > > /usr/lib/python/xen/xend/XendBootloader.py:25:
> >>> > > > > > RuntimeWarning: Python
> >>> > >
> >>> > > C
> >>> > >
> >>> > > > > API
> >>> > > > >
> >>> > > > > > version mismatch for module ptsname: This Python has API
> >>>
> >>> version
> >>>
> >>> > > 1013,
> >>> > >
> >>> > > > > > module ptsname has version 1012.
> >>> > > > > >   from xen.lowlevel import ptsname
> >>> > > > > >
> >>> > > > > > I have tried to install python from Sid and Lenny versions
> >>> > > > > > but
> >>>
> >>> none
> >>>
> >>> > > > > > seem
> >>> > > > >
> >>> > > > > to
> >>> > > > >
> >>> > > > > > change any of this... I have no Python knowledge at all so I
> >>>
> >>> would
> >>>
> >>> > > like
> >>> > >
> >>> > > > > to
> >>> > > > >
> >>> > > > > > know if anybody would happen to have an idea concerning this
> >>> > > > > > problem.
> >>> > > > > >
> >>> > > > > > I will be happy to give you more info if there is something
> >>>
> >>> missing
> >>>
> >>> > > in
> >>> > >
> >>> > > > > this
> >>> > > > >
> >>> > > > > > post.
> >>> > > > > >
> >>> > > > > > Thank you in advance for your help,
> >>> > > > > >
> >>> > > > > > Antoine Benkemoun
> >>> > > > >
> >>> > > > > --
> >>> > > > > Push Me Pull You - Distributed SCM tool (
> >>> > > > > http://www.cl.cam.ac.uk/~maw48/pmpu/<http://www.cl.cam.ac.uk/%7
> >>> > > > >Emaw48/pmpu/>
> >>>
> >>> <http://www.cl.cam.ac.uk/%7Emaw48
> >>>
> >>> > > > >/pmpu/>
> >>> > >
> >>> > > <http://www.cl.cam.ac.uk/%7Emaw48/pmp
> >>> > >
> >>> > > > >u/> )
> >>> > >
> >>> > > --
> >>> > > Push Me Pull You - Distributed SCM tool (
> >>> > > http://www.cl.cam.ac.uk/~maw48/pmpu/<http://www.cl.cam.ac.uk/%7Emaw
> >>> > >48/pmpu/>
> >>>
> >>> <http://www.cl.cam.ac.uk/%7Emaw48/pmp
> >>>
> >>> > >u/> )
> >>>
> >>> --
> >>> Push Me Pull You - Distributed SCM tool (
> >>> http://www.cl.cam.ac.uk/~maw48/pmpu/<http://www.cl.cam.ac.uk/%7Emaw48/p
> >>>mpu/> )
> >>
> >> --
> >> Antoine Benkemoun
> >> Tel : 03.51.53.57.00
> >> Port : 06.32.88.59.35
> >
> > --
> > Antoine Benkemoun
> > Tel : 03.51.53.57.00
> > Port : 06.32.88.59.35



-- 
Push Me Pull You - Distributed SCM tool (http://www.cl.cam.ac.uk/~maw48/pmpu/)

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.