Re: [Xen-users] Question on default xen network configs

[Asim <linkasim@xxxxxxxxx>]

The vifs will show up when you boot a domU.

-Asim

On 8/20/08, Phil Winterfield (winterfi) <winterfi@xxxxxxxxx> wrote:
> I have read through the wiki pages and other docs on what happens with
> xen network startup (split driver model) and it seems clear enough, but
> I am finding that the default configurations aren't showing the xenbr0
> and vif's.  According to what I have read, this should be done by
> default when '(network-script network-bridge)' is excuted in the xend
> startup script.  The ifconfig is shown below.  Are there other steps
> that are needed to get this default config to show up?
>
>
>
> Thanks,
>
> Phil
>
>
>
> [root@localhost ios]# ifconfig
>
> eth0      Link encap:Ethernet  HWaddr 00:15:17:46:EF:CA
>
>           inet addr:192.168.102.94  Bcast:192.168.102.95
> Mask:255.255.255.224
>
>           inet6 addr: fe80::215:17ff:fe46:efca/64 Scope:Link
>
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>
>           RX packets:715 errors:0 dropped:0 overruns:0 frame:0
>
>           TX packets:347 errors:0 dropped:0 overruns:0 carrier:0
>
>           collisions:0 txqueuelen:0
>
>           RX bytes:92461 (90.2 KiB)  TX bytes:56883 (55.5 KiB)
>
>
>
> eth1      Link encap:Ethernet  HWaddr 00:15:17:46:EF:CB
>
>           inet addr:192.168.102.71  Bcast:192.168.102.95
> Mask:255.255.255.224
>
>           inet6 addr: fe80::215:17ff:fe46:efcb/64 Scope:Link
>
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>
>           RX packets:30 errors:0 dropped:0 overruns:0 frame:0
>
>           TX packets:33 errors:0 dropped:0 overruns:0 carrier:0
>
>           collisions:0 txqueuelen:0
>
>           RX bytes:10710 (10.4 KiB)  TX bytes:8079 (7.8 KiB)
>
>
>
> lo        Link encap:Local Loopback
>
>           inet addr:127.0.0.1  Mask:255.0.0.0
>
>           inet6 addr: ::1/128 Scope:Host
>
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>
>           RX packets:12 errors:0 dropped:0 overruns:0 frame:0
>
>           TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
>
>           collisions:0 txqueuelen:0
>
>           RX bytes:964 (964.0 b)  TX bytes:964 (964.0 b)
>
>
>
> peth0     Link encap:Ethernet  HWaddr 00:15:17:46:EF:CA
>
>           inet6 addr: fe80::215:17ff:fe46:efca/64 Scope:Link
>
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>
>           RX packets:1358 errors:0 dropped:0 overruns:0 frame:0
>
>           TX packets:424 errors:0 dropped:0 overruns:0 carrier:0
>
>           collisions:0 txqueuelen:100
>
>           RX bytes:154616 (150.9 KiB)  TX bytes:72105 (70.4 KiB)
>
>           Base address:0x2020 Memory:98820000-98840000
>
>
>
> peth1     Link encap:Ethernet  HWaddr 00:15:17:46:EF:CB
>
>           inet6 addr: fe80::215:17ff:fe46:efcb/64 Scope:Link
>
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>
>           RX packets:498 errors:0 dropped:0 overruns:0 frame:0
>
>           TX packets:302 errors:0 dropped:0 overruns:0 carrier:0
>
>           collisions:0 txqueuelen:100
>
>           RX bytes:95790 (93.5 KiB)  TX bytes:48500 (47.3 KiB)
>
>           Base address:0x2000 Memory:98800000-98820000
>
>
>
> [root@localhost ios]# brctl show
>
> bridge name     bridge id               STP enabled     interfaces
>
> eth0            8000.00151746efca       no              peth0
>
> eth1            8000.00151746efcb       no              peth1
>
>
>
>

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users