[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-users] Xen & TC & Asterisk
- To: xen-users@xxxxxxxxxxxxxxxxxxx
- From: "drew einhorn" <drew.einhorn@xxxxxxxxx>
- Date: Thu, 21 Aug 2008 19:45:09 -0600
- Delivery-date: Thu, 21 Aug 2008 18:45:52 -0700
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:in-reply-to:mime-version :content-type:references; b=rV4K393Doj617JPE9/cdDnLcvkhIKnGVnMxlyHWNwWTCed1CfjEjPmXcqN+3XXfEvh U9cCa1/Ee4TOKWkIy3swYBrKmHebkurWqtDxEs12I0fyZP8kkHSeCRHpn+NDjIC8Bcuv F6cBnBYxkSUJTgg7SH4MmCeifX+QOAAvREjjY=
- List-id: Xen user discussion <xen-users.lists.xensource.com>
On Thu, Aug 21, 2008 at 9:27 AM, drew einhorn <drew.einhorn@xxxxxxxxx> wrote:
If you set up a vm with two ethernet ports, and bridge the traffic between them, the inbound traffic on one, is the outbound traffic on the other. Shape the outbound traffic on both ports.
Ooops, thought I sent this reply to the list
And I've looking a little closer at xen networking.
Looks like you may not have to set up another vm to handle the shaping
and get it inserted into your virtual network in the right place to
make it work.
I think if you can do it all on dom0 shaping outbound traffic on both eth0 and vif0.0
Will require some experiments to verify that this approach works as expected.
I've got other fish to fry first. (putting some iptables rules on
these interfaces, to isolate a couple dhcp servers). Traffic shaping
is a ways down on my priority list.
On Thu, Aug 21, 2008 at 8:49 AM, --[ UxBoD ]-- <uxbod@xxxxxxxxxxxx> wrote:
Hmmmm ... Looks like it is not quite correct then. What I am after is the ability to control both inbound and outbound VoIP traffic so it has priority. Any advice please ?
----- "Anna Fischer" < anna.fischer@xxxxxx> wrote:
> Note that the qdisc configuration you have posted regulates *outbound*
> traffic going onto the network. Is that what you want, because you
> talk about DomU being the destination? In general it is correct to
> attach qdiscs to peth0 for traffic to/from the network and eth0 only
> specific for Dom0 rate controlling.
>
>
>
> _______________________________________________
>
> Xen-users mailing list
>
> Xen-users@xxxxxxxxxxxxxxxxxxx
>
> http://lists.xensource.com/xen-users
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
-- Drew Einhorn
-- Drew Einhorn
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
